If you have ever had the chance to have several cell phones, you have no doubt realized that the quality of the screens has greatly evolved over a few years and that they now have, for the most high-end, an impressive definition. However, it is not necessarily good to have the best definition on your Crosscall Trekker-X4. If you ever have specific needs, you are on the right page, we will now teach you precisely how to change the screen resolution of your Crosscall Trekker-X4?
To do this, first, we will explain to you for whom it may be appropriate to modify it, and then, how to reduce or increase the definition of the screen of your Crosscall Trekker-X4? First directly from your mobile phone settings, then using root.
What is the point of changing the screen definition of my Crosscall Trekker-X4?
Before showing you the different procedures in full to modify the screen definition of your Crosscall Trekker-X4 as you wish, we will quickly see why it may be advisable to modify it. As we explained to you in the introduction of this guide, our phones are now real computers, which implies the possibility of modifying a lot of parameters to customize them and obtain the user experience that best suits their desires. Screen settings are one of these options
Indeed, the screens on Crosscall Trekker-X4 have become very power hungry and represent the majority of your battery consumption. It can therefore be consistent, for save battery by lowering the screen resolution of your Crosscall Trekker-X4. If you are ever mainly on social media, watch very little high definition media content or just use it to send emails or messages, having 4k on your mobile phone won't do you any good. In addition, if you have already lowered the definition of your Crosscall Trekker-X4 and you want to return to the default definition and you no longer remember the technique, you will be happy to discover it again in this article. If you just want to improve viewing comfort, you can change the size of the application icons on your Crosscall Trekker-X4.
Be careful though, the screens have maximum definitions, and whatever your expectations you will not be able to set a higher definition than that which the screen of your Crosscall Trekker-X4 can display, if it does not have enough pixels, you will not be able to perform the procedure.
How can I reduce or increase the screen definition of my Crosscall Trekker-X4?
We now move on to the practical part of this guide, you will be able to discover the technique to modify the definition of the screen of your Crosscall Trekker-X4. To start directly from the settings of your smartphone then using a procedure called "Root".
How do I change the screen definition of my Crosscall Trekker-X4 without root?
We start with the easiest procedure, be careful though, depending on the Android version installed on your Crosscall Trekker-X4, you may not be able to perform this technique. In fact, on some old versions this parameter is not available, if this is your situation, go to the next part of this post. For others, apply this technique:
- Go to the “Settings” of your Crosscall Trekker-X4
- Then click on the "View" menu
- Click on the "Screen resolution" setting
- Move the cursor to the left or to the right to modify the definition of your screen, the more you will go to the left the less it will be good, the more you will go to the right, the better it will be
How to change the definition with root on a Crosscall Trekker-X4?
If you never had access to the detailed settings just before and you still want to change the definition of your screen, rest assured, there is a procedure accessible to everyone, despite everything it will be a bit more complicated. and longer. We suggest that you do it only if you really need to change the screen definition of your Crosscall Trekker-X4. Check it out below:
- Activate the USB debugging mode in the "About device" menu
- install Android Studio on your computer to root your Crosscall Trekker-X4
- Connect your Crosscall Trekker-X4 to your computer, root your Crosscall Trekker-X4 with Android Studio
- Open the command console of your computer, for that type "Command prompt" in the search bar at the bottom left of your screen
- In your batch application type "adb shell dumpsys display | grep mBaseDisplayInfo ”, you will then access the screen resolution settings of your smartphone
- Locate in the script the data "Density" plus the number of your resolution, retain it to reset it to default setting
- Type now » adb shell wm density DPI & & adb reboot »To change the setting of your screen definition, for example 720
- Wait until your Crosscall Trekker-X4 restarts and enjoy your new resolution
In the event that you want a maximum of tutorials to become a master of the Crosscall Trekker-X4, we invite you to consult the other tutorials in the category: Crosscall Trekker-X4.
