If you have already had the chance to have several mobile phones, you have surely realized that the quality of the screens has changed considerably over a few years and that they now have, for the most high-end, a surprising definition. . Having said that, it is not necessarily good to have the best definition on your Wiko Ufeel. In the event that you have specific desires, you have arrived on the right site, we will now show you how to change the screen resolution of your Wiko Ufeel?
To do this, first of all, we will find out for whom it may be appropriate to modify it, after that, how to reduce or increase the definition of the screen of your Wiko Ufeel? First directly from the settings of your mobile phone, then using root.
Why change the screen definition of my Wiko Ufeel?
Before explaining in detail the different techniques to modify the screen definition of your Wiko Ufeel to your wishes, we will quickly see why it may be advisable to change it. As we told you in the introduction of this tutorial, our smartphones have become real laptops, which implies the possibility of changing many parameters to personalize them and obtain the user experience that is most appropriate to their desires. Screen settings are one of those possibilities
In fact, the screens on Wiko Ufeel have become very energy intensive and represent the majority of your battery consumption. It can therefore be consistent, for save battery reduce the screen resolution of your Wiko Ufeel. In the event that you are generally on social networks, that you watch very little multimedia content in high definition or that you simply use it to send emails or messages, have 4k on your mobile phone will not bring you anything. Also, if you have already reduced the resolution of your Wiko Ufeel and you want to return to the initial definition and you no longer remember the procedure, you will be happy to learn it again in this tutorial. In the event that you want to gain viewing comfort very easily, you can change the size of the application icons on your Wiko Ufeel.
Be careful though, the screens have maximum definitions, and whatever your needs you will not be able to set a resolution higher than that which the screen of your Wiko Ufeel can display, if it does not have enough pixels, you will not be able to complete the process.
How to reduce or increase the screen resolution of my Wiko Ufeel?
We now move on to the practical part of this tutorial, you will be able to learn the procedure to change the screen resolution of your Wiko Ufeel. First directly from the settings of your phone then using a procedure called "Root".
How to change the screen resolution of my Wiko Ufeel without root?
We start with the easiest procedure, be careful notwithstanding, depending on the Android version installed on your Wiko Ufeel, you may not be able to do this. In fact, on some old versions this setting is not accessible, if this is your situation, go to the next section of this post. For others, follow this process:
- Go to the “Settings” of your Wiko Ufeel
- Then click on the "View" menu
- Tap the "Screen resolution" setting
- Move the cursor to the left or to the right to change the definition of your screen, the more you go to the left the lower it will be, the more you will go to the right, the better it will be.
How to change the definition with root on Wiko Ufeel?
In the event that you did not have access to the settings seen just before and you still want to change the definition of your screen, do not worry, there is a procedure available for everyone, that said. is going to be a bit more complicated and longer. We recommend that you do this only if you really need to change the screen definition of your Wiko Ufeel. Check it out below:
- Activate the USB debugging mode in the "About device" menu
- install Android Studio on your pc to root your Wiko Ufeel
- Connect your Wiko Ufeel to your pc, root your Wiko Ufeel with Android Studio
- Open the command console of your pc, to do this type "Command prompt" in the search bar at the bottom left of your screen
- In your batch application type "adb shell dumpsys display | grep mBaseDisplayInfo ”, this will take you to the screen resolution settings of your phone
- Locate in the script the data "Density" plus the number of your resolution, retain it to reset it to default setting
- Now type » adb shell wm density DPI & & adb reboot »To change your screen definition setting, for example 720
- Wait until your Wiko Ufeel restarts and enjoy your new resolution
If you want a maximum of tutorials to become the king of Wiko Ufeel, we invite you to consult the other tutorials in the category: Wiko Ufeel.
