You will surely have noticed that the definition of the photo lenses of our phones is constantly improving. Which, of course, is a very good thing. However, who says better photos and videos also means much higher data weight. And that's not just the case with media files. As we increasingly use our Motorola One Action for all the small actions of everyday life such as document transfers, sending attachments by email… We tend to record a large amount of data on them.
And while manufacturers have recognized that storage is critical on cell phones, there are quite a few that don't have enough internal memory. Nevertheless, for a large majority of models it is possible to use additional storage with a memory card. This is precisely what we will see through this guide by presenting you how to insert an SD card into a Motorola One Action?
For this, first we will show you how to locate the intended slot for the memory card of your smartphone, then, after that, the technique to insert an SD card into a Motorola One Action.
Where to find the SD card drawer on Motorola One Action?
We therefore begin our article by showing you how to locate the location of the SD card on your Motorola One Action. This research will indeed be very simple. Note, however, that on some phones this is an option and that it is not 100% sure that your mobile phone has the slot for an external memory card.
SD cards can provide you with additional storage not superfluous because you will be able to increase your capacity by several 100 gigabytes in the event that you opt for a large card. To find the drawer, we recommend that you sift through the edge of your Motorola One Action. It is indeed on one side of the mobile phone that you are most likely to find it. It is located most of the time on the upper or lower flank. It is very easy to spot it, you will see a kind of notch with a location of about 2 centimeters and a small hole right next to it which allows you to open it. In this drawer you will most of the time also find the location for the SIM card of your Motorola One Action.
How to insert a memory card into a Motorola One Action?
We now move on to the practical part of this tutorial, you will see in detail the technique to put an SD card in your Motorola One Action.
The different tools to open the SD card drawer of a Motorola One Action
First and very important thing to know, there is a tool to open the SD card drawer of your Motorola One Action. As we told you beforehand, this is surely the location of your SIM card. You may remember when you first set up your mobile phone and did this.
We are now going to give you a list of the different ways to open this drawer via the small hole that serves as a lock:
- The basic drawer opening tool: You can find it in the box of your Motorola One Action, it is most of the time very small with part the size of a 5 cent coin which is used to press with your fingers and a long tip to insert into the hole
- A sewing needle : In case you can't find the tool or don't have the box left, a sewing needle is the best option to open it
- A trombone
- Safety pin
How to add a memory card to a Motorola One Action
Finally, now that you know all the tools and that you have located the drawer, we will teach you how to insert the micro SD card into your Motorola One Action. To do this, apply the few indications below:
- Switch off your mobile phone
- Insert the tip of the tool or your optional solution in the hole provided for this purpose
- Push the tool gently into the hole until the micro SD card tray of your Motorola One Action unlocks and pops out a few millimeters
- Remove it with your fingers
- Insert your SD card with care, making sure to pay attention to the direction in its slot
- Reposition the drawer in its place, in the right direction and push it in gently to the end
If you are looking for as many tutorials as possible to become the absolute master of the Motorola One Action, we invite you to watch the other tutorials in the category: Motorola one action.
