You will surely have observed it, the definition of the cameras of our smartphones is constantly improving. Which in itself is good news for us users. However, who says better quality photos and videos also says much larger file size. And it's not just the case with media files. As we always use more of our Blackview A100 for all the little actions of daily life such as file transfers, sending attachments by email… We tend to save a lot of data on them.
And even if manufacturers have integrated that storage is a key point on phones, there are a good number of them that do not have enough internal memory. However, for a large number of models it is possible to use additional storage using a memory card. This is precisely what we will learn through this guide by explaining to you how to insert an SD card into a Blackview A100?
In this context, first of all we will show you how to locate the location provided for the memory card of your phone, then, after that, the procedure for inserting an SD card into a Blackview A100.
Where is the SD card drawer on Blackview A100?
So we start our little tutorial by showing you how to locate the location of the SD card on your Blackview A100. This search is actually going to be very easy. Be aware that on some phones it is an option and it is not 100% sure that your phone has the slot for an external memory card.
SD cards will bring you significant additional storage because you can increase your capacity by several hundred gigabytes if you opt for a large card. To find the drawer, we advise you to listen to the edge of your Blackview A100. It is indeed on one of the sides of the phone that you are most likely to find it. It is usually found on the upper or lower flank. It is very easy to spot it, you will notice a kind of notch with a location of approximately 2 centimeters and a small hole right next to it which opens it. In this drawer you will generally also find the location for the SIM card of your Blackview A100.
How do I insert a memory card into a Blackview A100?
We are now moving on to the practical part of this tutorial, you will learn in detail the technique for putting an SD card in your Blackview A100.
The different solutions to open the SD card slot of a Blackview A100
First and very important thing to know, there is a tool to open the SD card drawer of your Blackview A100. As we explained to you beforehand, it is surely the location of your SIM card. You may remember when you first set up your phone and performed this manipulation.
We are now going to give you a list of the different tools to open this drawer through the small hole that serves as a lock:
- The basic drawer opening tool: You will find it in the box of your Blackview A100, it is generally very small with a part the size of a 5 cent piece which is used to press with your fingers and a long tip to insert into the hole
- A sewing needle : In case you do not get your hands on the tool or do not have the box left, a sewing needle is the best solution to open it
- A trombone
- Safety pin
The procedure for adding a memory card to a Blackview A100
Finally, now that you know all the tools and have located the drawer, we will show you how to insert the micro SD card into your Blackview A100. In this context, apply the few instructions below:
- Turn off your phone
- Insert the tip of the tool or your solution solution in the hole provided for this purpose
- Push the tool into the hole gently until the micro SD card tray of your Blackview A100 unlocks and comes out a few millimeters
- Remove it with your fingers
- Position your SD card with care, making sure to pay attention to the direction in its slot
- Reassemble the drawer in its place, in the right direction and push it down delicately to the end
In the event that you want a maximum of tutorials to become the king of the Blackview A100, we invite you to browse the other tutorials in the category: Blackview A100.
