You will surely have noticed that the quality of the photo sensors in our phones is constantly improving. Which, of course, is good news for us users. However, who says better quality photos and videos also means much higher file volume. And it's not just the case with media files. As we use our Crosscall core M5 more and more for all the little actions of everyday life such as transferring documents, sending attachments by email, etc. We tend to save a lot of data on them.
And even if manufacturers have understood that storage is a critical point on cell phones, there are a large number that do not have enough internal memory. However, for the vast majority of models it is possible to use additional storage thanks to a memory card. This is precisely what we will discover in this article by explaining to you how to insert an SD card in a Crosscall core M5?
In this context, first we will teach you how to locate the location provided for the memory card of your smartphone, then, after that, the technique for inserting an SD card into a Crosscall core M5.
Where to find the SD card drawer on Crosscall core M5?
So we start our article by teaching you how to find the location of the SD card on your Crosscall core M5. This search will be very simple indeed. Be aware that on some phones it is an option and it is not 100% sure that your mobile phone has the slot for an external memory card.
SD cards will add additional storage not superfluous because you can increase your capacity by several 100 gigabytes of gigabytes if you opt for a large card. To find the drawer, we advise you to examine the edge of your Crosscall core M5. It is indeed on one of the sides of the mobile phone that you are most likely to find it. It is usually located on the upper or lower flank. It is very easy to spot it, you will distinguish a kind of notch with a location of approximately 2 centimeters and a small hole right next to it which opens it. In this drawer you will generally also find the location for the SIM card of your Crosscall core M5.
How to insert a memory card in a Crosscall core M5?
We are now moving on to the practical part of this tutorial, you will discover in detail the procedure for putting an SD card in your Crosscall core M5.
The different solutions to open the SD card slot of a Crosscall core M5
First and very important thing to know, there is a tool to open the SD card drawer of your Crosscall core M5. As we explained to you beforehand, this is surely the location of your SIM card. You may remember when you first set up your mobile phone and performed this action.
We will now give you a list of the different tools to open this drawer via the small hole which serves as a lock:
- The original drawer opening tool: You will find it in the box of your Crosscall core M5, it is usually very small with a part the size of a 5 cent coin which allows you to press with your fingers and a long tip to insert into the hole
- A sewing needle : If you can't find the tool or don't have the box left, a sewing needle is the best alternative to open it
- A trombone
- Safety pin
The technique for adding a memory card to a Crosscall core M5
Finally, now that you know all the tools and that you have located the compartment, we will explain to you how to insert the micro SD card into your Crosscall core M5. In this context, follow the following instructions:
- Switch off your mobile phone
- Insert the tip of the tool or your alternative solution in the hole provided for this consequence
- Push the tool into the hole gently until the micro SD card tray of your Crosscall core M5 unlocks and comes out a few millimeters
- Remove it with your fingers
- Insert your SD card with care, making sure to pay attention to the direction in its slot
- Reposition the drawer in its place, in the right direction and push it in gently to the end
If you are looking for a maximum of tutorials to become a master of the Crosscall core M5, we invite you to consult the other tutorials in the category: crosscall core m5.
