As you will no doubt have observed, the quality of the photo lenses of our smartphones is constantly improving. Which, of course, is a very good thing. That said, who says better quality photos and videos also means much higher file volume. And it's not just the case with media files. As we use our Crosscall Core-Z5 more and more for all the little actions of everyday life such as file transfers, sending attachments by email… We tend to store a large amount of data on them.
And even if manufacturers have understood that storage is an essential point on mobile phones, there are a good number of them that do not have enough internal memory. However, for many models it is possible to use additional storage with a memory card. This is precisely what we will see through this guide by explaining to you how to insert an SD card in a Crosscall Core-Z5?
In this context, first we will teach you how to locate the location provided for the memory card of your smartphone, then, after that, the procedure for inserting an SD card into a Crosscall Core-Z5.
Where is the SD card drawer on Crosscall Core-Z5?
So we start our article by teaching you how to find the location of the SD card on your Crosscall Core-Z5. This search is actually going to be very easy. Be aware, however, that on some phones this is an option and that it is not 100% sure that your mobile phone has the slot for an external memory card.
SD cards can add significant additional storage to you because you can increase your capacity by several hundred gigabytes if you opt for a large card. To find the drawer, we recommend that you examine the edge of your Crosscall Core-Z100. It is indeed on one of the sides of the mobile phone that you are most likely to find it. It is found in most cases on the upper or lower flank. It is very easy to spot it, you will distinguish a kind of notch with a location of approximately 2 centimeters and a small hole right next to it which opens it. In this drawer you will in most cases also find the slot for the SIM card of your Crosscall Core-Z5.
How to insert a memory card into a Crosscall Core-Z5?
We are now moving on to the practical part of this tutorial, you will see in detail the technique for putting an SD card in your Crosscall Core-Z5.
The different ways to open the SD card drawer of a Crosscall Core-Z5
First and very important thing to know, there is a tool to open the SD card drawer of your Crosscall Core-Z5. As we explained to you just before, it is undoubtedly the location of your SIM card. You may remember when you first set up your mobile phone and performed this action.
We are now going to give you a list of the different tools to open this drawer through the small hole that serves as a lock:
- The original drawer opening tool: You can find it in the box of your Crosscall Core-Z5, it is in most cases very small with a part the size of a 5 cent coin which allows to press with your fingers and a long point to insert into the hole
- A sewing needle : In case you can't find the tool or don't have the box anymore, a sewing needle is the best alternative to open it
- A trombone
- Safety pin
The process for adding a memory card to a Crosscall Core-Z5
Finally, now that you know all the tools and that you have located the drawer, we are going to explain to you how to insert the micro SD card into your Crosscall Core-Z5. In this context, follow the few instructions below:
- Switch off your mobile phone
- Insert the tip of the tool or your alternative solution in the hole provided for this consequence
- Push the tool into the hole gently until the micro SD card tray of your Crosscall Core-Z5 unlocks and comes out a few millimeters
- Remove it with your fingers
- Insert your SD card with care, making sure to pay attention to the direction in its slot
- Reposition the drawer in its place, in the right direction and push it in gently to the end
In case you want as many tutorials as possible to become the absolute master of the Crosscall Core-Z5, we invite you to explore the other tutorials in the category: Crosscall Core-Z5.
