As you will no doubt have noticed, the quality of the camera lenses of our telephones is constantly improving. Which, of course, is a very good thing. However, who says better quality photos and videos also says much larger data volume. And it's not just the case with media files. As we always use more of our Google Pixel 6 pro for all the little actions of everyday life such as transferring documents, sending attachments by email, etc. We tend to save a large amount of data on them.
And even though manufacturers have understood that storage is an essential point on phones, there are a good number of them that do not have enough internal memory. However, for a large majority of models it is possible to use additional storage with a memory card. This is precisely what we are going to learn in this article by presenting you how to insert sd card in google pixel 6 pro?
To do this, to start we will show you how to locate the location provided for the memory card of your smartphone, then, after that, the process for inserting an SD card into a Google Pixel 6 pro.
Where is the SD card drawer on Google Pixel 6 pro?
So we start our article by showing you how to locate the location of the SD card on your Google Pixel 6 pro. This search will be very simple indeed. Note however that on some phones it is an option and that it is not 100% sure that your smartphone is equipped with the slot for an external memory card.
SD cards will provide you with unnecessary additional storage because you can increase your capacity by several hundred gigabytes if you opt for a large card. To find the drawer, we recommend that you sift through the edge of your Google Pixel 100 pro. It is in fact on one of the sides of the smartphone that you are most likely to find it. It is located mostly on the upper or lower flank. It is very easy to spot it, you will discover a kind of notch with a location of approximately 2 centimeters and a small hole right next to it which opens it. In this drawer you will most of the time also find the location for the SIM card of your Google Pixel 6 pro.
How to insert a memory card in a Google Pixel 6 pro?
We are now moving on to the practical part of this tutorial, you will learn in detail the technique for putting an SD card in your Google Pixel 6 pro.
The different ways to open the SD card slot of a Google Pixel 6 pro
First and very important thing to know, there is a tool to open the SD card drawer of your Google Pixel 6 pro. As we explained to you a little above, it is undoubtedly the location of your SIM card. You may remember when you first set up your smartphone and performed this operation.
We are now going to give you a list of the different ways to open this drawer via the small hole that serves as a lock:
- The basic tool for opening the drawer: You can find it in the box of your Google Pixel 6 pro, it is most of the time very small with a part the size of a 5 cent coin which is used to press with your fingers and a long point to insert into the hole
- A sewing needle : If you ever can't find the tool or you don't have the box left, a sewing needle is the best option to open it
- A trombone
- Safety pin
The process to add a memory card on a Google Pixel 6 pro
Finally, now that you know all the tools and have found the compartment, we will explain how to insert the micro SD card into your Google Pixel 6 pro. To do this, apply the few instructions below:
- Turn off your smartphone
- Insert the tip of the tool or your optional solution in the hole provided for this purpose
- Gently push the tool into the hole until the micro SD card tray of your Google Pixel 6 pro unlocks and pops out a few millimeters
- Remove it with your fingers
- Install your SD card with care, making sure to pay attention to the direction in its slot
- Put the drawer back in its place, in the right direction and push it down gently to the end
If you want as many tutorials as possible to become the king of the Google Pixel 6 pro, we invite you to explore the other tutorials in the category: Google Pixel 6 pro.
