You will surely have noticed that the quality of the photo sensors in our phones is constantly improving. Which in itself is a very good thing. Despite everything, who says better quality photos and videos also says much larger file volume. And it's not just the case with media files. As we always use more of our Google Pixel 6 for all the little actions of daily life such as transferring documents, sending attachments by email, etc. We tend to keep a large amount of data on them.
And although brands have understood that storage is a critical point in mobile phones, there are a large number of them that do not have enough internal memory. However, for many models it is possible to use additional storage with a memory card. This is precisely what we are going to discover in this article by presenting you how to insert an SD card into a Google Pixel 6?
To do this, first we will show you how to locate the location provided for the memory card of your device, then, after that, the technique for inserting an SD card into a Google Pixel 6.
Where is the SD card drawer positioned on Google Pixel 6?
So we start our little tutorial by showing you how to locate the location of the SD card on your Google Pixel 6. This search will indeed be very easy. Note however that on some phones this is an option and it is not 100% sure that your phone is equipped with the slot for an external memory card.
SD cards will add significant additional storage because you can increase your capacity by several hundred gigabytes if you choose a large card. To find the drawer, we advise you to listen to the edge of your Google Pixel 100. It is in fact on one of the sides of the phone that you are most likely to find it. It is located mostly on the upper or lower flank. It is very easy to spot it, you will spot a kind of notch with a location of about 2 centimeters and a small hole right next to it which opens it. In this drawer you will most of the time also find the location for the SIM card of your Google Pixel 6.
How to insert a memory card into a Google Pixel 6?
We are now moving on to the practical part of this tutorial, you will discover in detail the procedure for putting an SD card in your Google Pixel 6.
The different ways to open the SD card drawer of a Google Pixel 6
First and very important thing to know, there is a tool to open the SD card drawer of your Google Pixel 6. As we told you beforehand, it is surely the location of your SIM card. You may remember when you first set up your phone and performed this action.
We will now give you a list of the different solutions to open this drawer via the small hole that serves as a lock:
- The original drawer opening tool: You can find it in the box of your Google Pixel 6, it is most of the time very small with a part the size of a 5 cent coin which is used to press with your fingers and a long point to insert into the hole
- A sewing needle : In case you do not get your hands on the tool or do not have the box left, a sewing needle is the best solution to open it
- A trombone
- Safety pin
The technique to add a memory card to a Google Pixel 6
Finally, now that you know all the tools and that you have located the compartment, we will explain how to insert the micro SD card into your Google Pixel 6. To do this, follow the few instructions below:
- Turn off your phone
- Insert the tip of the tool or your solution solution in the hole provided for this purpose
- Push the tool gently into the hole until the micro SD card tray of your Google Pixel 6 unlocks and pops out a few millimeters
- Remove it with your fingers
- Position your SD card with care, making sure to pay attention to the direction in its slot
- Put the drawer back in its place, in the right direction and push it down gently to the end
In case you want a lot of tutorials to become the king of the Google Pixel 6, we invite you to browse the other tutorials in the category: Google Pixel 6.
