As you will probably have observed, the definition of photo sensors in our mobile phones is constantly improving. Which in itself is a very good thing. However, who says better quality photos and videos also means much higher file size. And that's not just the case with media files. As we increasingly use our Lenovo Vibe P1m for all the small actions of daily life such as file transfers, sending attachments by email… We tend to keep a lot of data on these.
And while manufacturers have recognized that storage is a big deal on phones, there are plenty of them that don't have enough internal memory. However, for a multitude of models it is possible to use additional storage with a memory card. This is precisely what we will discover in this article by explaining to you how to insert an SD card into a Lenovo Vibe P1m?
To do this, first we will explain how to locate the location for your smartphone's memory card, then, secondly, the procedure for inserting an SD card into a Lenovo Vibe P1m.
Where to find the SD card drawer on Lenovo Vibe P1m?
We therefore begin our article by explaining how to locate the location of the SD card on your Lenovo Vibe P1m. This research will indeed be very simple. Note, however, that on some phones this is an option and that it is not 100% sure that your phone has the slot for an external memory card.
SD cards can provide you with additional storage not superfluous because you will be able to increase your capacity by several 100 gigabytes in the event that you opt for a large card. To find the drawer, we recommend that you sift through the edge of your Lenovo Vibe P1m. It is indeed on one side of the phone that you are most likely to find it. It is generally located on the upper or lower flank. It is very easy to spot it, you will spot a kind of notch with a location of about 2 centimeters and a small hole right next to it which allows you to open it. In this drawer, you will usually also find the slot for the SIM card of your Lenovo Vibe P1m.
How to insert a memory card into a Lenovo Vibe P1m?
We now move on to the practical part of this guide, you will discover in detail the procedure to put an SD card in your Lenovo Vibe P1m.
The different ways to open the SD card slot of a Lenovo Vibe P1m
First and very important thing to know, there is a tool to open the SD card drawer of your Lenovo Vibe P1m. As we told you beforehand, this is probably the location of your SIM card. You may remember when you first set up your phone and performed this action.
We will now give you a list of the different ways to open this drawer through the small hole that serves as a lock:
- The original drawer opening tool: You will find it in the box of your Lenovo Vibe P1m, it is usually very small with a part the size of a 5 cent coin that allows you to press with your fingers and a long tip to insert into the hole
- A sewing needle : In the event that you do not get your hands on the tool or do not have the box left, a sewing needle is the best option to open it
- A trombone
- Safety pin
The procedure to add a memory card to a Lenovo Vibe P1m
Finally, now that you know all the tools and have found the drawer, we will show you how to insert the micro SD card into your Lenovo Vibe P1m. To do this, follow the following guidelines:
- Turn off your phone
- Insert the tip of the tool or your optional solution in the hole provided for this purpose
- Push the tool gently into the hole until the micro SD card tray of your Lenovo Vibe P1m unlocks and pops out a few millimeters
- Remove it with your fingers
- Position your SD card with care, making sure to pay attention to the direction in its slot
- Reposition the drawer in its place, in the right direction and push it in gently to the end
If you ever want a maximum of tutorials to become a master of the Lenovo Vibe P1m, we invite you to browse the other tutorials in the category: Lenovo Vibe P1m.
