As you will have probably observed, the definition of the photo sensors of our smartphones is constantly improving. Which in itself is a very good thing. However, who says better quality photos and videos also means much larger file size. And that's not just the case with media files. As we always use more of our Motorola E6 Play for all the small actions of daily life such as transferring documents, sending attachments by email… We tend to keep a lot of data on these.
And while brands have figured out that storage is a big deal on smartphones, there are plenty of them that don't have enough internal memory. However, for a large number of models it is possible to use additional storage using a memory card. This is precisely what we will discover through this guide by explaining to you how to insert an SD card into a Motorola E6 Play?
In this context, first of all we will show you how to locate the intended slot for the memory card of your smartphone, then, after that, the technique to insert an SD card into a Motorola E6 Play.
Where is the SD card drawer on Motorola E6 Play?
We therefore start our article by showing you how to locate the location of the SD card on your Motorola E6 Play. This research will indeed be very simple. However, you should know that on some phones this is an option and that it is not 100% sure that your phone has the slot for an external memory card.
SD cards can add additional storage, which is not trivial because you can increase your capacity by several 100 gigabytes in the event that you opt for a large card. To find the drawer, we suggest that you examine the edge of your Motorola E6 Play. It is indeed on one side of the phone that you are most likely to find it. It is located most of the time on the upper or lower flank. It is very easy to spot it, you will distinguish a kind of notch with a location of approximately 2 centimeters and a small hole right next to it which allows you to open it. In this drawer you will most of the time also find the slot for the SIM card of your Motorola E6 Play.
How to insert a memory card into a Motorola E6 Play?
We now move on to the practical part of this guide, you will discover in detail the solution to put an SD card in your Motorola E6 Play.
The different tools to open the SD card slot of a Motorola E6 Play
First and very important thing to know, there is a tool to open the SD card drawer of your Motorola E6 Play. As we explained to you beforehand, this is probably the location of your SIM card. You may remember when you first set up your phone and did this.
We are now going to give you a list of the different ways to open this drawer through the small hole that serves as a lock:
- The original drawer opening tool: You will find it in the box of your Motorola E6 Play, it is most of the time very small with a part the size of a 5 cent coin which is used to press with your fingers and a long tip to insert into the hole
- A sewing needle : If you don't get your hands on the tool or don't have the box left, a sewing needle is the best option to open it
- A trombone
- Safety pin
How to add a memory card to a Motorola E6 Play
Finally, now that you know all the tools and that you have located the compartment, we will show you how to insert the micro SD card into your Motorola E6 Play. In this context, apply the few instructions below:
- Turn off your phone
- Insert the tip of the tool or your optional solution in the hole provided for this purpose
- Push the tool gently into the hole until the micro SD card tray of your Motorola E6 Play unlocks and pops out a few millimeters
- Remove it with your fingers
- Insert your SD card with care, making sure to pay attention to the direction in its slot
- Reassemble the drawer in its place, in the right direction and push it down delicately to the end
If you want a lot of tutorials to become the king of the Motorola E6 Play, we invite you to consult the other tutorials in the category: Motorola E6 Plus.
