You will surely have noticed that the definition of the cameras of our phones is constantly improving. Which, of course, is a very good thing. Having said that, better quality photos and videos also mean much higher file volumes. And that's not just the case with media files. As we use more and more of our Motorola One Vision for all the small actions of everyday life such as file transfers, sending attachments by email… We tend to keep a lot of data on them.
And while brands have understood that storage is a big deal on phones, there are plenty of them that don't have enough internal memory. However, for a multitude of models it is possible to use additional storage using a memory card. This is precisely what we will learn through this guide by explaining to you how to insert an SD card in a Motorola One Vision?
In this context, to begin with, we will teach you how to locate the location provided for your phone's memory card, then, secondly, how to insert an SD card into a Motorola One Vision.
Where to find the SD card drawer on Motorola One Vision?
So let's start our little tutorial by teaching you how to locate the location of the SD card on your Motorola One Vision. This research will indeed be very simple. You should know however that on some phones this is an option and that it is not 100% sure that your mobile phone is equipped with the slot for an external memory card.
SD cards will bring you additional storage which is not trivial because you will be able to increase your capacity by several 100 gigabytes if you ever opt for a large card. To find the drawer, we advise you to examine the edge of your Motorola One Vision. It is indeed on one side of the mobile phone that you are most likely to find it. It is generally located on the upper or lower flank. It is very easy to spot it, you will spot a kind of notch with a location of about 2 centimeters and a small hole right next to it which allows you to open it. In this drawer you will usually also find the location for the SIM card of your Motorola One Vision.
How to insert a memory card into a Motorola One Vision?
We now move on to the practical part of this tutorial, you will learn in detail the solution to put an SD card in your Motorola One Vision.
The different tools to open the SD card slot of a Motorola One Vision
First and very important thing to know, there is a tool to open the SD card drawer of your Motorola One Vision. As we told you beforehand, this is surely the location of your SIM card. You may remember when you first set up your mobile phone and did this.
We are now going to give you a list of the different solutions to open this drawer through the small hole that serves as a lock:
- The basic drawer opening tool: You will find it in the box of your Motorola One Vision, it is usually very small with a part the size of a 5 cent coin that allows you to press with your fingers and a long point to insert into the hole
- A sewing needle : In the event that you cannot find the tool or do not have the box left, a sewing needle is the best alternative to open it
- A trombone
- Safety pin
How to add a memory card to a Motorola One Vision
Finally, now that you know all the tools and that you have located the location, we will show you how to insert the micro SD card into your Motorola One Vision. In this context, apply the few instructions below:
- Switch off your mobile phone
- Insert the tip of the tool or your alternative solution into the hole provided for this purpose
- Push the tool gently into the hole until the micro SD card tray of your Motorola One Vision unlocks and pops out a few millimeters
- Remove it with your fingers
- Insert your SD card with care, making sure to pay attention to the direction in its slot
- Put the drawer back in its place, in the right direction and push it down gently to the end
If you want as many tutorials as possible to become a Motorola One Vision master, we invite you to consult the other tutorials in the category: Motorola One Vision.
