As you will probably have noticed, the quality of our smartphones' cameras is constantly improving. Which, of course, is a very good thing. However, who says better quality photos and videos also means much greater data weight. And that's not just the case with media files. As we always use more of our Wiko Jerry 3 for all the small actions of everyday life such as transferring documents, sending attachments by email… We tend to keep a lot of data on these.
And while manufacturers have recognized that storage is critical on cellphones, there are quite a few that don't have enough internal memory. Fortunately, for a large majority of models it is possible to use additional storage using a memory card. This is precisely what we will see through this guide by presenting you how to insert an SD card into a Wiko Jerry 3?
To do this, first we will explain how to locate the location for the memory card of your device, then, secondly, the technique to insert an SD card into a Wiko Jerry 3.
Where is the SD card drawer on Wiko Jerry 3?
We will therefore start our little tutorial by explaining to you how to locate the location of the SD card on your Wiko Jerry 3. This search will actually be very simple. Be aware that on some phones this is an option and that it is not 100% sure that your phone has the slot for an external memory card.
SD cards will add additional storage which is not trivial because you can increase your capacity by several 100 gigabytes in the event that you opt for a large card. To find the drawer, we advise you to sift through the edge of your Wiko Jerry 3. It is indeed on one of the sides of the phone that you are most likely to find it. It is located most of the time on the upper or lower flank. It is very easy to spot it, you will discover a kind of notch with a location of about 2 centimeters and a small hole right next to it which allows you to open it. In this drawer you will most of the time also find the location for the SIM card of your Wiko Jerry 3.
How to insert a memory card into a Wiko Jerry 3?
We will now move on to the practical part of this article, you will see in detail the solution to put an SD card in your Wiko Jerry 3.
The different ways to open the SD card slot of a Wiko Jerry 3
First and very important thing to know, there is a tool to open the SD card drawer of your Wiko Jerry 3. As we explained to you beforehand, this is probably the location of your SIM card. You may remember when you first set up your phone and performed this action.
We are now going to give you a list of the different tools to open this drawer via the small hole that serves as a lock:
- The basic drawer opening tool: You will find it in the box of your Wiko Jerry 3, it is most of the time very small with part the size of a 5 cent coin which is used to press with your fingers and a long tip to insert into the hole
- A sewing needle : If you can't find the tool or don't have the box left, a sewing needle is the best solution to open it
- A trombone
- Safety pin
How to add a memory card to a Wiko Jerry 3
Finally, now that you know all the tools and that you have located the drawer, we will show you how to insert the micro SD card into your Wiko Jerry 3. To do this, apply the following instructions:
- Turn off your phone
- Insert the tip of the tool or your solution solution in the hole provided for this consequence
- Push the tool gently into the hole until the micro SD card tray of your Wiko Jerry 3 unlocks and comes out a few millimeters
- Remove it with your fingers
- Install your SD card with care, making sure to pay attention to the direction in its slot
- Put the drawer back in its place, in the right direction and push it down gently to the end
In the event that you want a maximum of tutorials to become a master of the Wiko Jerry 3, we invite you to browse the other tutorials in the category: Wiko Jerry 3.
