You will surely have noticed that the quality of the photo sensors of our smartphones is constantly improving. Which, of course, is a very good thing. However, who says better quality photos and videos also says much greater data weight. And it's not just the case with media files. As we always use more of our Xiaomi Redmi Note 10S for all the little actions of everyday life such as file transfers, sending attachments by email… We tend to keep a lot of data on them.
And although manufacturers have understood that storage is a key point on cell phones, there are many that do not have enough internal memory. Fortunately, for a large number of models it is possible to use additional storage thanks to a memory card. This is precisely what we are going to see through this guide by explaining to you how to insert an SD card in a Xiaomi Redmi Note 10S?
In this context, first we will teach you how to locate the location provided for the memory card of your phone, then, secondly, the procedure for inserting an SD card into a Xiaomi Redmi Note 10S.
Where is the SD card drawer on Xiaomi Redmi Note 10S?
So we start our article by teaching you how to locate the location of the SD card on your Xiaomi Redmi Note 10S. This search is actually going to be very simple. Note however that on some phones it is an option and that it is not 100% sure that your smartphone is equipped with the slot for an external memory card.
SD cards will add significant additional storage to you because you will be able to increase your capacity by several 100 gigabytes of gigabytes if you ever opt for a large card. To find the drawer, we recommend that you sift through the edge of your Xiaomi Redmi Note 10S. It is indeed on one of the sides of the smartphone that you are most likely to find it. It is usually found on the upper or lower flank. It is very easy to spot it, you will notice a kind of notch with a location of about 2 centimeters and a small hole right next to it which opens it. In this drawer you will generally also find the slot for the SIM card of your Xiaomi Redmi Note 10S.
How to insert a memory card into a Xiaomi Redmi Note 10S?
We are now moving on to the practical part of this tutorial, you will see in detail the procedure for putting an SD card in your Xiaomi Redmi Note 10S.
The different solutions to open the SD card slot of a Xiaomi Redmi Note 10S
First and very important thing to know, there is a tool to open the SD card drawer of your Xiaomi Redmi Note 10S. As we told you just before, this is surely the location of your SIM card. You may remember when you first set up your smartphone and did this.
We will now give you a list of the different tools to open this drawer via the small hole that serves as a lock:
- The original drawer opening tool: You will find this in the box of your Xiaomi Redmi Note 10S, it is usually very small with a part the size of a 5 cent piece which is used to press with your fingers and a long point to insert into the hole
- A sewing needle : If ever you can't find the tool or you don't have the box left, a sewing needle is the best solution to open it
- A trombone
- Safety pin
The process for adding a memory card to a Xiaomi Redmi Note 10S
Finally, now that you know all the tools and you have located the compartment, we will teach you how to insert the micro SD card into your Xiaomi Redmi Note 10S. In this context, apply the few indications below:
- Turn off your smartphone
- Insert the tip of the tool or your solution solution in the hole provided for this purpose
- Gently push the tool into the hole until the micro SD card tray of your Xiaomi Redmi Note 10S unlocks and pops out a few millimeters
- Remove it with your fingers
- Install your SD card with care, making sure to pay attention to the direction in its slot
- Reposition the drawer in its place, in the right direction and push it in gently to the end
If you are looking for as many tutorials as possible to become the king of the Xiaomi Redmi Note 10S, we invite you to browse the other tutorials in the category: Xiaomi Redmi Note 10S.