You will surely have observed it, the definition of the photo sensors of our phones is constantly improving. Which in itself is good news for us users. However, who says better photos and videos also means much greater data weight. And that's not just the case with media files. As we use more and more of our ZenFone Max Pro M2 for all the small actions of everyday life such as file transfers, sending attachments by email… We tend to keep a lot of data on them.
And while manufacturers have recognized that storage is a big deal on phones, there are a lot of them that don't have enough internal memory. However, for a multitude of models it is possible to use additional storage using a memory card. This is precisely what we are going to learn today by introducing you how to insert an SD card into a ZenFone Max Pro M2?
To do this, first we will explain how to locate the intended slot for your phone's memory card, then, after that, the technique to insert an SD card into a ZenFone Max Pro M2.
Where is the SD card drawer located on ZenFone Max Pro M2?
So let's start our little tutorial by explaining how to find the location of the SD card on your ZenFone Max Pro M2. This research is actually going to be very straightforward. However, you should know that on some phones this is an option and that it is not 100% sure that your mobile phone is equipped with the slot for an external memory card.
SD cards can add significant additional storage because you can increase your capacity by several 100 gigabytes in the event that you opt for a large card. To find the drawer, we advise you to sift through the edge of your ZenFone Max Pro M2. It is indeed on one side of the mobile phone that you are most likely to find it. It is located most of the time on the upper or lower flank. It is very easy to spot it, you will spot a kind of notch with a location of approximately 2 centimeters and a small hole right next to it which allows you to open it. In this drawer you will most of the time also find the slot for the SIM card of your ZenFone Max Pro M2.
How to insert a memory card into a ZenFone Max Pro M2?
We now move on to the practical part of this tutorial, you will learn in detail the technique to put an SD card in your ZenFone Max Pro M2.
The different tools to open the SD card drawer of a ZenFone Max Pro M2
First and very important thing to know, there is a tool to open the SD card drawer of your ZenFone Max Pro M2. As we explained to you beforehand, this is surely the location of your SIM card. You may remember when you first set up your mobile phone and performed this action.
We will now make a list of the different ways to open this drawer via the small hole that serves as a lock:
- The original drawer opening tool: You can find it in the box of your ZenFone Max Pro M2, it is most of the time very small with a part the size of a 5 cent coin which allows you to press with your fingers and a long tip to insert into the hole
- A sewing needle : In the event that you cannot find the tool or that you do not have the box anymore, a sewing needle is the best solution to open it
- A trombone
- Safety pin
How to add a memory card to a ZenFone Max Pro M2
Finally, now that you know all the tools and that you have located the location, we will show you how to insert the micro SD card into your ZenFone Max Pro M2. To do this, apply the following guidelines:
- Switch off your mobile phone
- Insert the tip of the tool or your solution solution in the hole provided for this consequence
- Push the tool gently into the hole until the micro SD card tray of your ZenFone Max Pro M2 unlocks and pops out a few millimeters
- Remove it with your fingers
- Position your SD card with care, making sure to pay attention to the direction in its slot
- Reposition the drawer in its place, in the right direction and push it in gently to the end
In the event that you want as many tutorials as possible to become the king of the ZenFone Max Pro M2, we invite you to explore the other tutorials in the category: ZenFone Max Pro M2.
