If you do not want to be visible on the net with your Crosscall TREKKER-M1, to be constantly inundated with targeted advertisements or not, that you want to make sure that no one can have access to your activities on the net, do not forget that you are not the only one. With all the scandals that are emerging on the non-protection of internet user data, more and more people want to be invisible! And it goes through the IP address of your mobile phone. To assist you in this procedure, we will explain how to modify the IP address of your Crosscall TREKKER-M1?

To do this, we will, first, find out what an IP address is used for, then explain the measures that you can take to avoid disclose the IP address of your Crosscall TREKKER-M1 , first by camouflaging it, then by modifying it.

modify-ip-address-crosscall-trekker-m1

What is the IP address of my Crosscall TREKKER-M1 used for?

To start this article, we will first briefly explain What is the IP address of a TREKKER-M1 Crosscall and what is it used for . As its name suggests, it is an address, "Internet Protocol Access" , it will actually allow your mobile phone to connect to an internet network. It is therefore necessary to allow you to surf the net.

She is very often dynamic , especially in the event that you are browsing through the mobile network of your mobile provider, each time you disconnect or connect you will be assigned a new address. She may be static in the case of a local connection via Wi-Fi.

It is to this address that will be sent to you all the data that you download or that you need throughout your navigation on the net.

How to modify the IP address of my Crosscall TREKKER-M1?

If you want change the IP address of your Crosscall TREKKER-M1 it's probably that yours is blocked on certain sites or forums. Do not worry, it is possible to modify it. Whether public or local, we reveal below the two techniques that you will be able to use. If you have internet connection problems on your Crosscall TREKKER-M1, you can read our article on this subject to solve them.

Change the public IP address of your TREKKER-M1 Crosscall using a VPN

We start by revealing to you the change the public IP address of your Crosscall TREKKER-M1, using a VPN. This is really relevant when you want to view content from your home country abroad. It will allow you to access sites that would be prohibited by your address. VPNs give you the ability to connect to servers that are able to act as an intermediary between you and the internet. In fact, it will not be your IP address however that of the VPN that will be detected, suddenly you will have an IP address different from yours. You will also have to deactivate your GPS position to avoid being spotted, for the rest, apply the following indications:

  • Download and install a VPN, we recommend that you use Hotspot Shield which will give you the possibility for free to use 500 MB per day
  • Open the application
  • Choose the country in which you want to connect to a server
  • So you can use an IP address of the country and read sites or content exclusively available in the latter.

Changing the public IP address of a TREKKER-M1 Crosscall

To change the public IP address of your Crosscall TREKKER-M1, the process is quite easy, as we told you, when you connect to the Internet you will have a new IP address reassigned to your mobile phone. We will therefore use this trick to change it:

  • Activate the airplane mode of your Crosscall TREKKER-M1
  • Wait a few minutes
  • Turn off airplane mode
  • You can control on MyIP what is your address to check the success of this operation

Modify the local or static IP address of your Crosscall TREKKER-M1

Finally, for change the local IP address of your Crosscall TREKKER-M1 you can only modify it if you are connected to a Wi-Fi network. Nothing complicated for that:

  • Unlock your Crosscall TREKKER-M1
  • Scroll down the top notification bar
  • Go to the Wi-Fi settings
  • Press and hold on the network you are connected to
  • Click on " Modify the network  »
  • Then in " Advanced options  »Select» Static IP  »And enter the IP you want
  • We advise you to only modify the last numbers

If you ever want a maximum of tutorials to become the king of Crosscall TREKKER-M1, we invite you to watch the other tutorials in the category: Crosscall TREKKER-M1.