In the event that you do not want to be visible on the web with your Motorola One Vision, constantly being inundated with targeted or untargeted advertisements, and want to make sure that no one can access your web activities, you will be glad to hear that you are not the only one. With all the scandals that are emerging on the non-protection of internet user data, more and more people wish to be invisible! And it goes through the IP address of your device. To assist you in this procedure, we will teach you how to change the IP address of your Motorola One Vision?

To do this, we will first see what an IP address is used for, then teach you the steps you can take to avoid disclose the IP address of your Motorola One Vision , to start by camouflaging it, then modifying it.

modify-ip-address-Motorola-One-Vision

What is the IP address of my Motorola One Vision used for?

To start this article, we will first briefly teach you what is the IP address of a Motorola One Vision and what is its function . As the name suggests it is an address, "Internet Protocol Access" , it will actually give your phone the ability to connect to an internet network. It is therefore necessary to give you the possibility of browsing the internet.

It is in most cases dynamic , especially in the event that you are browsing via the mobile network of your telephone provider, each time you disconnect or connect you will be assigned a new address. She may be static in the case of a local connection via Wi-Fi.

It is to this address that all the data that you download or that you need during your navigation on the web will be sent to you.

How do I change the IP address of my Motorola One Vision?

In the event that you wish change the IP address of your Motorola One Vision it's probably yours blocked on certain sites or forums. Don't worry, it is possible to change it. Whether it is public or local, we explain below the two methods that you will be able to use. In the event that you have internet connection problems on your Motorola One Vision, we invite you to take a look at our guide on this subject to solve them.

Change the public IP address of your Motorola One Vision using a VPN

We therefore start by showing you the change the public IP address of your Motorola One Vision, using a VPN. This technique is particularly useful if you want to watch content from your home country abroad. It will give you the possibility to access sites which would be blocked by your address. VPNs allow you to connect to servers that will play the role of intermediary between you and the web. Thus, it will not be your IP address, however, that of the VPN that will be taken into account, consequently you will have an IP address different from yours. You will also need deactivate your GPS position to avoid being spotted, for the rest, apply the following instructions:

  • Download and install a VPN, we recommend using Hotspot Shield which will give you the possibility for free to use 500 MB per day
  • Open the application
  • Choose the country in which you want to connect to a server
  • So you can use an IP address of the country and watch sites or content exclusively available in that country.

Change the public IP address of a Motorola One Vision

To change the public IP address of your Motorola One Vision, the technique is simple enough, as we explained to you, when you connect to the Internet you will have a new IP address reassigned to your phone. We will therefore use this trick to change it:

  • Activate the airplane mode of your Motorola One Vision
  • Wait a few minutes
  • Turn off airplane mode
  • You can check on MyIP what is your address to verify the success of this operation

Change the local or static IP address of your Motorola One Vision

Finally, for change the local IP address of your Motorola One Vision you will only be able to change it if you are connected to a Wi-Fi network. Nothing very difficult for that:

  • Unlock your Motorola One Vision
  • Scroll down the top notification bar
  • Go to the Wi-Fi settings
  • Press and hold on the network you are connected to
  • Click on " Modify the network  »
  • Then in " Advanced options  »Select» Static IP  »And enter the IP you want
  • We suggest that you only change the last numbers

In the event that you want as many tutorials as possible to become the absolute master of the Motorola One Vision, we invite you to consult the other tutorials in the category: Motorola One Vision.