If you do not want to be visible on the web with your Wiko Power U30, to be constantly inundated with targeted or non-targeted advertisements, that you want to make sure that no one can have access to your activities on the web, remember that You are not the only one. With all the scandals that surface on the non-protection of Internet users' data, more and more people want to be invisible! And this goes through the IP address of your mobile phone. To assist you in this process, we are going to show you how to change the IP address of your Wiko Power U30?

In this context, we will, first of all, see what an IP address corresponds to, then show you the measures that you can implement to avoid disclose the IP address of your Wiko Power U30 , to start by camouflaging it, then changing it.

modify-ip-address-wiko-power-u30

What is the principle of the IP address of my Wiko Power U30?

To start this tutorial, we will first briefly show you what does the IP address of a Wiko Power U30 represent and what is it for . As the name suggests it is an address, "Internet Protocol Access" , it will in fact give your smartphone the possibility of connect to an internet network. It is therefore necessary to give you the possibility of browsing the web.

It is in most cases dynamic , especially if you are browsing using your mobile provider's mobile network, each time you disconnect or connect we will assign you a new address. She may be static in the case of a local connection via Wi-Fi.

It is to this address that all the data that you download or that you need throughout your navigation on the web can be sent to you.

How do I change the IP address of my Wiko Power U30?

If you want change the IP address of your Wiko Power U30 it's probably that yours is blocked on certain sites or forums. Don't be afraid, you can change it. Whether it is public or local, we explain below the two techniques available to you. If you have internet connection problems on your Wiko Power U30, you can read our guide on this subject to solve them.

Change the public IP address of your Wiko Power U30 using a VPN

We therefore start by revealing to you the changing the public IP address of your Wiko Power U30, using a VPN. This technique is particularly relevant in the event that you want to watch content from your home country abroad. It will give you the possibility of accessing sites that would be blocked by your address. VPNs give you the ability to connect to servers who will play the role of intermediary between you and the web. This way, it will not be your IP address however that of the VPN that will be detected, suddenly you will have an IP address different from yours. You will also need deactivate your GPS position to avoid being spotted, for the rest, follow the instructions below:

  • Download and install a VPN, we recommend that you use Hotspot Shield which will give you the possibility free of charge to use 500 MB per day
  • Open the application
  • Choose the country in which you want to connect to a server
  • So you can use an IP address of the country and consult sites or content exclusively available in the latter.

Change the public IP address of a Wiko Power U30

To change the public IP address of your Wiko Power U30 the technique is quite simple, as we told you, when you connect to the internet you will have a new IP address reallocated to your smartphone. We will therefore use this trick to change it:

  • Activate the airplane mode of your Wiko Power U30
  • Wait a few minutes
  • Turn off airplane mode
  • You can control on MyIP what is your address to check the success of this intervention

Change the local or static IP address of your Wiko Power U30

Finally, for change the local IP address of your Wiko Power U30 you will only be able to change it if you are connected to a Wi-Fi network. There is nothing difficult about this:

  • Unlock your Wiko Power U30
  • Drag the top notification bar
  • Go to the Wi-Fi settings
  • Press and hold on the network you are connected to
  • Click on " Modify the network  »
  • Then in " Advanced options  »Select» Static IP  »And enter the IP you want
  • We recommend that you only change the last numbers

If you are ever looking for a lot of tutorials to become a master of the Wiko Power U30, we invite you to watch the other tutorials in the category: Wiko Power U30.