Although the Android platform improves over time, it still happens to encounter bugs... Some are not really problematic and will only have a very slight impact on your daily life when others may, on the contrary, prevent you altogether. using your Crosscall core M5. In this article, we are going to tell you about a bug which fortunately only affects a few devices, but which is very disturbing. This is a startup bug, when you turn your phone back on, it gets stuck on the logo.
So in this article, we will teach you how to fix Crosscall core M5 stuck on logo on startup? In this context, we will first try to interpret with you the cause of this bug, after that, to reveal all the solutions at your disposal to unlock your Crosscall core M5 stuck on Android logo.
Why does my Crosscall core M5 get stuck on Android logo on startup?
So we start this tutorial by discovering why your Crosscall core M5 is stuck on Android logo on startup? This bug is particularly disabling because it prevents you from performing the slightest operation on your phone and moreover you will not even be able to finalize the start-up process, your Crosscall core M5 will suddenly be completely unusable.
The reasons for this bug can be various, although regularly it is after an update that a Crosscall core M5 hangs on the logo on startup. It is generally a problem during the installation of the data which generates this bug. Sometimes it is after a fall, an immersion in water that the bug can happen. In these cases, however, it is not possible to do much except to bring your Crosscall core M5 to a repairer since it is probably the components that have been touched that are responsible for the problem. The battery is sometimes the problem component, you can check the battery status of your Crosscall core M5.
That said, we have already seen cases for which the cause is less obvious to distinguish, no recent update installed, no drop... In these cases, as for a problem following an update, our solutions can help you, discover the following ones.
How to fix my Crosscall core M5 stuck on Android logo when turning on?
We now move on to the solutions part of our little file, and we will reveal three different solutions, from the easiest to achieve to the most complicated for you. fix your Crosscall core M5 stuck on Android logo.
Force stop your Crosscall core M5
First of the solutions, the simplest. You have certainly tried to restart your Crosscall core M5 by leaving the “Power” button pressed for a few moments. If ever this action had no effect you will have to use the forced restart. You may not be familiar with this technique, however it is very simple and aims to restart a phone even if it bugs. If this solution does not work, you can try another technique to force your Crosscall core M5 to shut down, the objective being to turn it off so that the bug is no longer present during the restart:
- To force restart your Crosscall core M5, keep your finger pressed for 10 seconds on the "Power" key
- If that doesn't work, wait for the battery of your Crosscall core M5 to discharge completely to try to restart it once turned off
Wipe Cache your Crosscall core M5
If the first manipulation did not work, we will move on to advanced solutions. We will go through the recovery mode of your Crosscall core M5 to unlock it. This mode is particularly useful in the event that you experience a bug, in the event that you want to reset your smartphone... In this part, we are going to perform a Wipe Cache which will correspond to cleaning all the cache memory of your Crosscall core M5 and therefore repairing any bugs:
- Turn off your Crosscall core M5, or wait for the battery to completely discharge
- Recharge it more than 50%
- Hold the key "High Volume" and the button "Power" pressed for several moments until you see this very basic menu appear on the screen
- Navigate with the volume keys to "Wipe Cache Partition"
- Confirm the operation with the "Power" key
- Select now "Reboot System Now" to restart your Crosscall core M5
Perform a Factory Reset of your Crosscall core M5 to unlock it
If the first technique did not work, we will be even more radical, you will however lose all the data stored on your Crosscall core M5, that said if it is unusable, you will not be able to recover anything in any case. It's up to you to decide if you prefer to try to go see a repairer or carry out the procedure yourself if you have already saved all your data:
- Turn off your Crosscall core M5 or wait for it to turn off by itself when the battery is empty
- Make sure it has more than 50% battery
- Access recovery mode with the procedure seen in the previous part
- Go to the option "Wipe Data / Factory Reset" with the volume keys, and validate, the manipulation with the power button
- Finish the procedure by choosing the option "Reboot System Now"
In the event that you are looking for as many tutorials as possible to become the absolute master of the Crosscall core M5, we invite you to consult the other tutorials in the category: crosscall core m5.
