Although the Android platform changes over the years, it is unfortunately not uncommon to encounter bugs ... Some are not completely problematic and will not disturb you in your daily life when others may on the contrary prevent you from doing anything. using your Huawei Enjoy 10S. Today we are going to tell you about a bug that however only affects a few devices, but which is very disturbing. This is a startup bug, when you turn your mobile phone back on, it gets stuck on the logo.
So today we will show you How to fix Huawei Enjoy 10S stuck on logo on startup? To do this, we will first try to interpret with you the cause of this bug, and then, to reveal all the procedures at your disposal to unlock your Huawei Enjoy 10S stuck on Android logo.
Why does my Huawei Enjoy 10S get stuck on the Android logo when switching on?
So we start this tutorial by discovering the reason why your Huawei Enjoy 10S gets stuck on the Android logo on ignition? This bug is really annoying because it prevents you from performing any action on your mobile phone and moreover you will not even be able to complete the startup process, your Huawei Enjoy 10S will therefore be completely unusable.
The reasons for this bug can be various, although often It is following an update that a Huawei Enjoy 10S hangs on the logo on ignition. It is in most cases a problem during data installation that will trigger this bug. Sometimes, it is after a fall, an immersion in water that the bug can happen. In these cases, it is unfortunately not possible to do much outside to take your Huawei Enjoy 10S to a repairman since it is probably components that have been affected that are causing the problem. The battery is sometimes the component that causes the problem, we invite you to check the battery status of your Huawei Enjoy 10S.
Nevertheless, we have already observed cases for which the cause is less obvious to distinguish, no recent update installed, no drop ... In these cases, as for a problem following an update, our solutions can help you, discover the following.
How to fix my Huawei Enjoy 10S stuck on the Android logo when turning on?
We will now move on to the solutions part of our small file, and we will reveal three different solutions, from the simplest to implement to the most complicated for fix your Huawei Enjoy 10S stuck on Android logo.
Force shutdown of your Huawei Enjoy 10S
First of the alternatives, the simplest. You have surely tried to restart your Huawei Enjoy 10S by leaving the “Power” button on the latter pressed for a few seconds. If this action does not work you will have to use the forced restart. You may not know this solution but it is very simple and aims to restart a mobile phone even if it has a bug. If this solution does not work, you can try another solution to force shutdown of your Huawei Enjoy 10S, the goal being to turn it off so that the bug disappears during restart:
- To force restart your Huawei Enjoy 10S, keep your finger pressed on the "Power" key for 10 seconds
- If it ever doesn't work, wait until the battery of your Huawei Enjoy 10S is empty to try to turn it on again once it is off
Perform a Wipe Cache of your Huawei Enjoy 10S
If the first technique did not work, we will move on to advanced solutions. We will go through the recovery mode of your Huawei Enjoy 10S to unlock it. This mode is really useful if you are the victim of a bug, if you want to reset your device ... Wipe Cache which will correspond to cleaning the entire cache memory of your Huawei Enjoy 10S and therefore repairing any bugs:
- Turn off your Huawei Enjoy 10S, or wait for the battery to drain completely
- Recharge it more than 50%
- Hold the key "High Volume" and the button "Power" pressed for several seconds until you see this very basic menu appear on the screen
- Navigate with the volume keys to "Wipe Cache Partition"
- Validate the operation with the "Power" key
- Select now "Reboot System Now" to restart your Huawei Enjoy 10S
Factory reset your Huawei Enjoy 10S to unlock it
If the first solution did not work, we will be even more radical, you will nevertheless lose all the data stored on your Huawei Enjoy 10S, however if it is unusable, you will not be able to recover anything anyway. It's up to you to decide if you prefer to try to go to a repairer or to carry out the technique yourself if you have already saved all your data:
- Switch off your Huawei Enjoy 10S or wait for it to switch off by itself when the battery is discharged
- Check that it has more than 50% battery
- Access recovery mode with the technique seen in the previous part
- Go to the option "Wipe Data / Factory Reset" with the volume keys, and validate the operation with the power button
- Finish the technique by choosing the option "Reboot System Now"
If you want a lot of tutorials to become the king of the Huawei Enjoy 10S, we invite you to browse the other tutorials in the category: Huawei Enjoy 10S.
