Although the Android platform improves over time, it is unfortunately not uncommon to experience bugs ... Some are not completely problematic and will not impact you very little in your daily life when others may have the opposite completely prevent you from using your HUAWEI MEDIAPAD M3. In this article, we are going to tell you about a bug that only affects a few devices, however, which is very disturbing. This is a startup bug, when you turn your mobile phone back on, it gets stuck on the logo.
So in this article, we will teach you How to fix HUAWEI MEDIAPAD M3 stuck on logo on startup? To do this, we will first try to understand with you the cause of this bug, after that, to expose you all the procedures at your disposal for unlock your HUAWEI MEDIAPAD M3 stuck on Android logo.
The reason why my HUAWEI MEDIAPAD M3 gets stuck on the Android logo when turning on?
We therefore begin this article by discovering Why does your HUAWEI MEDIAPAD M3 get stuck on the Android logo when turning on? This bug is really disabling because it prevents you from performing any action on your mobile phone and moreover you will not even be able to complete the startup process, your HUAWEI MEDIAPAD M3 will therefore be completely unusable.
The reasons for this bug can be many, although often It is following an update that a HUAWEI MEDIAPAD M3 hangs on the logo on ignition. It is in most cases a problem during the installation of the data that will cause this bug. Sometimes, it is after a fall, an immersion in water that the bug can happen. In these cases, it is unfortunately not possible to do much outside to take your HUAWEI MEDIAPAD M3 to a repairer Since it is surely components that have been affected that are responsible for the problem. The battery is in some cases the component that causes the problem, we invite you to check the battery status of your HUAWEI MEDIAPAD M3.
However, we have already seen cases for which the cause is more vague, no recent update installed, no drop ... In these situations, as for a problem following an update, our solutions may help you, discover them below.
How to fix my HUAWEI MEDIAPAD M3 stuck on Android logo when turning on?
We now move on to the solutions part of our article, and we will show you three different solutions, from the simplest to achieve to the most complicated for fix your HUAWEI MEDIAPAD M3 stuck on Android logo.
Force stop your HUAWEI MEDIAPAD M3
The first, the easier. You have certainly tried to restart your HUAWEI MEDIAPAD M3 by keeping the “Power” button pressed for a few seconds. If this manipulation has had no effect, you will have to use the forced restart. You may not know this solution, however it is very simple and aims to restart a mobile phone even if it bugs. If this solution does not work, you can try another solution to force shutdown of your HUAWEI MEDIAPAD M3, the goal being to turn it off so that the bug is no longer present when restarting:
- To force restart your HUAWEI MEDIAPAD M3, keep your finger pressed for 10 seconds on the "Power" key
- If that doesn't work, wait for the battery of your HUAWEI MEDIAPAD M3 to empty in order to try to turn it on again once it is off
Perform a Wipe Cache of your HUAWEI MEDIAPAD M3
If the first solution didn't work, we'll move on to advanced solutions. We will go through the recovery mode of your HUAWEI MEDIAPAD M3 to unlock it. This mode is really convenient if you ever experience a bug, if you ever want to reset your device ... We will in this part accomplish a Wipe Cache which will correspond to cleaning all the cache memory of your HUAWEI MEDIAPAD M3 and therefore repairing any bugs:
- Turn off your HUAWEI MEDIAPAD M3, or wait for the battery to drain completely
- Recharge it more than 50%
- Hold the key "High Volume" and the button "Power" pressed for several seconds until this very basic menu appears on the screen
- Navigate with the volume keys to "Wipe Cache Partition"
- Validate the process with the "Power" key
- Now select "Reboot System Now" to restart your HUAWEI MEDIAPAD M3
Factory reset your HUAWEI MEDIAPAD M3 to unlock it
If the first solution did not work, we will be even more radical, you will nevertheless lose all the data saved on your HUAWEI MEDIAPAD M3, despite everything if it is unusable, you will not be able to recover anything. It's up to you to see if you prefer to try to go see a repairer or do the procedure yourself if you have already backed up all your data:
- Turn off your HUAWEI MEDIAPAD M3 or wait for it to turn off on its own when the battery is discharged
- Check that it has more than 50% battery
- Access the recovery mode with the approach seen in the previous part
- Go to the option "Wipe Data / Factory Reset" with the volume keys, and validate the process with the power button
- Finish the process by choosing the option "Reboot System Now"
If you want a lot of tutorials to become a HUAWEI MEDIAPAD M3 master, we invite you to explore the other tutorials in the category: HUAWEI MEDIAPAD M3.
