Even if the Android platform improves over time, it is unfortunately not uncommon to experience bugs ... Some are not really problematic and will not disturb you in your daily life when others may have the problem. on the other hand, completely preventing you from using your Moto E6 Plus. Today we are going to tell you about a bug that fortunately only affects a few devices, however, which is very disturbing. This is a startup bug, when you turn your phone back on, it gets stuck on the logo.

So today we will show you How to fix Moto E6 Plus stuck on logo on startup? To do this, we will first try to understand with you the nature of this bug, then, to reveal all the solutions at your disposal for Unlock your Moto E6 Plus stuck on Android logo.

block-on-logo-start-Moto-E6-Plus

Why does my Moto E6 Plus get stuck on the Android logo when I turn it on?

We therefore begin this article by discovering Why is your Moto E6 Plus stuck on the Android logo on ignition? This bug is really disabling because it prevents you from performing any operation on your phone and moreover you will not even be able to finalize the start-up process, your Moto E6 Plus will therefore be completely unusable.

The origins of this bug can be numerous, although regularly It is after an update that a Moto E6 Plus hangs on the logo on ignition. It is most of the time a problem during the installation of the files which will generate this bug. Sometimes, it is after a fall, an immersion in water that the bug can happen. In these cases, however, it is not possible to do much outside to take your Moto E6 Plus to a repairer because it is probably damaged components that are causing the problem. The battery is sometimes the problematic component, you can check the battery status of your Moto E6 Plus.

Despite everything, we have already observed cases where nature is less obvious to distinguish, no recent update installed, no fall ... In these cases, as for a problem following an update, our solutions will help you, discover the following.

How to fix my Moto E6 Plus stuck on Android logo when turning on?

We now move on to the solutions part of our post, and we will reveal three different techniques, from the easiest to implement to the most complex for fix your Moto E6 Plus stuck on Android logo.

Force stop your Moto E6 Plus

The first of the solutions, the easier. You have probably tried to restart your Moto E6 Plus by holding down the “Power” button on the latter for a few moments. If this manipulation had no effect, you will have to use the forced restart. You may not know this manipulation, however, it is very simple and aims to restart a phone even if it bugs. If this solution does not work, you can try another solution to force the shutdown of your Moto E6 Plus, the objective being to turn it off so that the bug disappears when you restart it:

  • To force restart your Moto E6 Plus, keep your finger pressed on the "Power" key for 10 seconds
  • If that doesn't work, wait for the battery of your Moto E6 Plus to discharge completely to try to turn it back on once it has been turned off

Wipe Cache of your Moto E6 Plus

If the first manipulation did not work, we will move on to advanced solutions. We will go through the recovery mode of your Moto E6 Plus to unlock it. This mode is really convenient if you are ever the victim of a bug, if you ever want to reset your device ... We will in this part perform a Wipe Cache which corresponds to cleaning the entire cache memory of your Moto E6 Plus and therefore repairing any bugs:

  • Switch off your Moto E6 Plus, or wait for the battery to discharge completely
  • Recharge it more than 50%
  • Hold the key "High Volume" and the button "Power" pressed for several moments until you see this very basic menu appear on the screen
  • Navigate with the volume keys to "Wipe Cache Partition"
  • Validate the procedure with the "Power" key
  • Select now "Reboot System Now" to restart your Moto E6 Plus

Factory reset your Moto E6 Plus to unlock it

If the first solution did not work, we will be even more radical, you will still lose all the data stored on your Moto E6 Plus, however if it is unusable, you will not be able to recover anything. It's up to you to decide if you prefer to try to go see a repairer or do the technique yourself if you have already backed up all your data:

  • Switch off your Moto E6 Plus or wait for it to switch off on its own when the battery is discharged
  • Make sure it has more than 50% battery
  • Access recovery mode with the technique seen in the previous part
  • Go to the option "Wipe Data / Factory Reset" with the volume keys, and confirm the procedure with the power button
  • Finish the technique by choosing the option "Reboot System Now"

In the event that you want as many tutorials as possible to become the king of Moto E6 Plus, we invite you to watch the other tutorials in the category: Moto E6 Plus.