Even if the Android platform is improving over time, it is unfortunately not uncommon to experience bugs... Some are not particularly problematic and will only have a very slight impact on your daily life when others may on the contrary completely prevent you from using your Motorola edge 30 neo. In this guide, we are going to tell you about a bug which, despite everything, only affects a few devices, but which is very disturbing. This is a startup bug, when you turn on your mobile phone, it remains stuck on the logo.
So in this guide, we will show you how to fix a Motorola edge 30 neo stuck on the logo on startup? To do this, we will first try to interpret with you the cause of this bug, after that, to present all the procedures that you can carry out to unlock your Motorola edge 30 neo stuck on the Android logo.
Why does my Motorola edge 30 neo get stuck on Android logo on startup?
We therefore start this article by discovering the reason why your Motorola edge 30 neo is stuck on the Android logo at startup? This bug is really annoying because it prevents you from performing the slightest action on your mobile phone and moreover you will not even be able to finalize the start-up process, your Motorola edge 30 neo will suddenly be completely unusable. .
The causes of this bug can be multiple, even if, regularly it is after an update that a Motorola edge 30 neo hangs on the logo at startup. It is in most cases a problem during the installation of the data that causes this bug. Sometimes it is after a fall, an immersion in water that the bug can happen. In these cases, it is unfortunately not possible to do much except to take your Motorola edge 30 neo to a repairer because it is undoubtedly components which have been affected which are responsible for the problem. The battery is sometimes the problematic component, you can check the battery status of your Motorola edge 30 neo.
Despite everything, we have already seen cases for which the cause is less obvious to distinguish, no recent update installed, no drop... In these situations, as for a problem following an update, our solutions can help you, discover them below.
How to fix my Motorola edge 30 neo stuck on Android logo when turning on?
We are now moving on to the solutions part of our little file, and we are going to present three different methods to you, from the simplest to carry out to the most complex for repair your Motorola edge 30 neo stuck on the Android logo.
Force stop your Motorola edge 30 neo
First of the procedures, the simplest. You have probably tried to restart your Motorola edge 30 neo by pressing the “Power” button on it for a few moments. If this manipulation does not work, you will have to use the forced restart. You may not know this manipulation but it is very simple and aims to restart a mobile phone even if it bugs. In the event that this solution does not work, you can try another technique to force your Motorola edge 30 neo to shut down, the goal being to turn it off so that the bug is no longer present during the restart:
- To force restart your Motorola edge 30 neo, keep your finger pressed for 10 seconds on the "Power" key
- In the event that this does not work, wait for the battery of your Motorola edge 30 neo to drain to try to restart it once turned off
Make a Wipe Cache of your Motorola edge 30 neo
In the event that the first manipulation did not work, we will move on to advanced solutions. We will go through the recovery mode of your Motorola edge 30 neo to unlock it. This mode is really useful in the event that you experience a bug, in the event that you want to reset your phone ... We will in this part accomplish a Wipe Cache which will correspond to cleaning all the cache memory of your Motorola edge 30 neo and therefore repairing any bugs:
- Turn off your Motorola edge 30 neo, or wait for the battery to drain completely
- Recharge it more than 50%
- Hold the key "High Volume" and the button "Power" pressed for several moments until you see this very basic menu appear on the screen
- Navigate with the volume keys to "Wipe Cache Partition"
- Confirm the operation with the "Power" key
- Now select, "Reboot System Now" to restart your Motorola edge 30 neo
Perform a Factory Reset of your Motorola edge 30 neo to unlock it
In the event that the first technique did not work, we are going to be even more radical, you will however lose all the data saved on your Motorola edge 30 neo, despite everything if it is unusable, you will not be able to ways recover anything. It's up to you to decide if you prefer to try to go see a repairer or do the process yourself if you have already backed up all your data:
- Turn off your Motorola edge 30 neo or wait for it to turn off by itself when the battery is empty
- Make sure it has more than 50% battery
- Access the recovery mode with the approach seen in the previous part
- Go to the option "Wipe Data / Factory Reset" with the volume keys, and validate, the manipulation with the power button
- Finish the process by choosing the option "Reboot System Now"
In the event that you want a maximum of tutorials to become the king of the Motorola edge 30 neo, we invite you to consult the other tutorials in the category: motorola edge 30 neo.
