Even if the Android platform changes over time, it is unfortunately not uncommon to experience bugs... Some are not particularly problematic and will only disturb you very little in your daily life when others may the opposite completely prevent you from using your Motorola Moto G41. In this guide, we are precisely going to tell you about a bug which, despite everything, only affects a few devices, but which is nevertheless very disturbing. This is a startup bug, when you turn your phone back on, it gets stuck on the logo.
In this guide, we will therefore explain to you How to fix Motorola Moto G41 stuck on logo on startup? For this, we will first try to interpret with you the nature of this bug, after that, to present all the procedures that you can carry out to Unlock your Motorola Moto G41 stuck on Android logo.
The reason why my Motorola Moto G41 gets stuck on Android logo when turning on?
We therefore start this guide by discovering why your Motorola Moto G41 is stuck on the Android logo when switching on? This bug is particularly disabling because it prevents you from performing any operation on your phone and moreover you will not even be able to complete the start-up process, your Motorola Moto G41 will therefore be completely unusable.
The reasons for this bug can be multiple, although often it is following an update that a Motorola Moto G41 hangs on the logo when switching on. It is in most cases a problem during the installation of the files that will trigger this bug. Sometimes, it is following a fall, an immersion in water that the bug can happen. In these cases, it is unfortunately not possible to do much except to take your Motorola Moto G41 to a repairman because it is probably damaged components that are causing the problem. The battery is sometimes the component that causes concern, do not hesitate to check the battery status of your Motorola Moto G41.
However, we have already studied cases for which the nature is less obvious to distinguish, no recent update installed, no drop... In these situations, as for a problem following an update, our solutions will help you, discover them below.
How to fix my Motorola Moto G41 stuck on Android logo when turning on?
We now move on to the solutions part of our article, and we will present three different methods, from the easiest to perform to the most complicated to repair your Motorola Moto G41 stuck on Android logo.
Force stop your Motorola Moto G41
First of the solutions, the simplest. You have probably tried to restart your Motorola Moto G41 by holding down the “Power” button on it for a few moments. If this manipulation does not work, you will have to use the forced restart. You may not be familiar with this technique, however it is very simple and aims to restart a phone even if it bugs. In the event that this solution does not work, you can try another solution to force your Motorola Moto G41 to shut down, the goal being to turn it off so that the bug is no longer present when you next restart:
- To force restart your Motorola Moto G41, keep your finger pressed on the "Power" key for 10 seconds
- In the event that this does not work, wait for the battery of your Motorola Moto G41 to drain to try to turn it back on once turned off
Perform a Wipe Cache of your Motorola Moto G41
In the event that the first technique did not work, we will move on to advanced solutions. We will go through the recovery mode of your Motorola Moto G41 to unlock it. This mode is particularly convenient in the event that you experience a bug, in the event that you want to reset your smartphone... In this part, we are going to carry out a Wipe Cache which corresponds to cleaning all the cache memory of your Motorola Moto G41 and therefore repairing any bugs:
- Turn off your Motorola Moto G41, or wait for the battery to drain completely
- Recharge it more than 50%
- Hold the key "High Volume" and the button "Power" pressed for several moments until you see this very basic menu appear on the screen
- Navigate with the volume keys to "Wipe Cache Partition"
- Confirm the operation with the "Power" key
- Now select "Reboot System Now" to restart your Motorola Moto G41
Factory reset your Motorola Moto G41 to unlock it
In the event that the first solution did not work, we are going to be even more radical, you will still lose all the data saved on your Motorola Moto G41, however if it is unusable, you will not be able to the cases recover nothing. It's up to you to decide if you prefer to try to go see a repairer or do the procedure yourself if you have already backed up all your data:
- Turn off your Motorola Moto G41 or wait for it to turn off by itself when the battery is empty
- Make sure it has more than 50% battery
- Access recovery mode with the procedure seen in the previous part
- Go to the option "Wipe Data / Factory Reset" with the volume keys, and confirm the operation with the power button
- Finish the procedure by choosing the option "Reboot System Now"
If you ever want as many tutorials as possible to become a master of the Motorola Moto G41, we invite you to watch the other tutorials in the category: Motorola G41.
