Even if the Android platform improves in the long run, it still happens to suffer bugs ... Some are not really problematic and will not disturb you in your daily life when others will prevent you completely. to use your Motorola P50. In this guide, we are going to tell you about a bug that only affects a few devices, however, which is very disturbing. This is a startup bug, when you turn your mobile phone back on, it gets stuck on the logo.
So in this guide we will show you How to fix Motorola P50 stuck on logo on startup? In this context, we will first of all try to interpret with you the nature of this bug, and then, to show you all the alternatives available to you for Unlock your Motorola P50 stuck on Android logo.
Why does my Motorola P50 get stuck on the Android logo when switching on?
So we start this tutorial by discovering the reason why your Motorola P50 gets stuck on the Android logo when switching on? This bug is particularly disabling because it prevents you from performing any operation on your mobile phone and moreover you will not even be able to finalize the start-up process, your Motorola P50 will therefore be completely unusable.
The origins of this bug can be numerous, although often it is after an update that a Motorola P50 hangs on the logo on ignition. It is usually a problem during the installation of the data that will generate this bug. Sometimes, it is after a fall, an immersion in water that the bug can happen. In these cases, however, it is not possible to do much outside to take your Motorola P50 to a repairman since it is probably damaged components that are responsible for the problem. The battery is sometimes the problematic component, you can check the battery status of your Motorola P50.
That said, we have already seen cases where nature is less obvious to distinguish, no recent update installed, no drop ... In these cases, as for a problem following an update, our solutions will help you, discover them below.
How to fix my Motorola P50 stuck on Android logo when turning on?
We now move on to the solutions part of our small file, and we will show you three different solutions, from the simplest to achieve to the most complicated for repair your Motorola P50 stuck on Android logo.
Force stop your Motorola P50
The first of the solutions, the easier. You have no doubt tried to restart your Motorola P50 by leaving the “Power” button pressed for a few seconds. If this action had no effect you will have to use the forced restart. You may not know this manipulation, however, it is very simple and aims to restart a mobile phone even if it has a bug. If this solution does not work, you can try another technique to force shutdown your Motorola P50, the goal being to turn it off so that the bug is no longer present during the restart:
- To force restart your Motorola P50, keep your finger pressed on the "Power" key for 10 seconds
- In the event that this does not work, wait for the battery of your Motorola P50 to empty to try to restart it once it is off
Make a Wipe Cache of your Motorola P50
In the event that the first solution did not work, we will move on to the advanced solutions. We will go through the recovery mode of your Motorola P50 to unlock it. This mode is particularly useful if you ever experience a bug, if you ever want to reset your smartphone ... In this part, we are going to accomplish a Wipe Cache which corresponds to cleaning all the cache memory of your Motorola P50 and therefore repairing any bugs:
- Turn off your Motorola P50, or wait for the battery to drain completely
- Recharge it more than 50%
- Hold the key "High Volume" and the button "Power" pressed for several seconds until you see this very basic menu appear on the screen
- Navigate with the volume keys to "Wipe Cache Partition"
- Confirm the procedure with the "Power" key
- Now select "Reboot System Now" to restart your Motorola P50
Factory reset your Motorola P50 to unlock it
In the event that the first technique did not work, we will be even more radical, you will however lose all the data stored on your Motorola P50, however if it is unusable, you will not be able to do anything. 'nothing happens to recover. It's up to you to see if you prefer to try to go see a repairer or carry out the procedure yourself if you have already saved all your data:
- Turn off your Motorola P50 or wait for it to turn off on its own when the battery is discharged
- Make sure it has more than 50% battery
- Access recovery mode with the procedure seen in the previous part
- Go to the option "Wipe Data / Factory Reset" with the volume keys, and validate the procedure with the power button
- Finish the procedure by choosing the option "Reboot System Now"
If you are looking for as many tutorials as possible to become the absolute master of the Motorola P50, we invite you to browse the other tutorials in the category: Motorola P50.
