Even if the Android platform is improving over time, it still happens to encounter bugs ... Some are not completely problematic and will not disturb you in your daily life when others may instead. completely prevent the use of your Wiko Lenny 3. Today we are just going to tell you about a bug which fortunately only affects a few devices, however which is very disturbing. This is a startup bug, when you turn your phone back on, it gets stuck on the logo.
So today we will teach you How to fix a Wiko Lenny 3 stuck on logo on startup? In this context, we will first of all try to interpret with you the origin of this bug, then, then, to show you all the solutions at your disposal for unlock your Wiko Lenny 3 stuck on Android logo.
The reason why my Wiko Lenny 3 gets stuck on the Android logo when switching on?
We therefore start this article by seeing Why does your Wiko Lenny 3 get stuck on the Android logo when switching on? This bug is particularly annoying because it prevents you from performing any action on your phone and moreover you will not even be able to finalize the start-up process, your Wiko Lenny 3 will therefore be completely unusable.
The origins of this bug can be multiple, although often it is after an update that a Wiko Lenny 3 hangs on the logo on ignition. It is usually a problem during the installation of the data that will trigger this bug. Sometimes, it is after a fall, an immersion in water that the bug can happen. In these cases, it is unfortunately not possible to do much outside to take your Wiko Lenny 3 to a repairman because it is probably damaged components that are causing the problem. The battery is sometimes the problematic component, you can check the battery status of your Wiko Lenny 3.
Nevertheless, we have already observed cases for which the origin is less obvious to distinguish, no recent update installed, no drop ... In these cases, as for a problem following an update, our solutions can help you, discover them below.
How to fix my Wiko Lenny 3 stuck on Android logo when turning on?
We now move on to the solutions part of our post, and we will show you three different alternatives, from the simplest to achieve to the most complicated for repair your Wiko Lenny 3 stuck on Android logo.
Force stop your Wiko Lenny 3
First of the methods, the easiest. You have probably tried to restart your Wiko Lenny 3 by leaving the “Power” button on the latter pressed for a few seconds. If this action had no effect, you will have to use the forced restart. You may not be familiar with this manipulation, however, it is very simple and aims to restart a phone even if it has a bug. If this solution does not work, you can try another solution to force the shutdown of your Wiko Lenny 3, the objective being to turn it off so that the bug is no longer present when you restart:
- To force restart your Wiko Lenny 3, keep your finger pressed on the "Power" key for 10 seconds
- If it doesn't work, wait for the battery of your Wiko Lenny 3 to empty to try to restart it once it is off
Make a Wipe Cache of your Wiko Lenny 3
If the first manipulation did not work, we will move on to advanced solutions. We will go through the recovery mode of your Wiko Lenny 3 to unlock it. This mode is particularly useful if you are ever the victim of a bug, if you ever want to reset your mobile phone ... In this part, we are going to perform a Wipe Cache which will correspond to cleaning the entire cache memory of your Wiko Lenny 3 and therefore repairing any bugs:
- Switch off your Wiko Lenny 3, or wait for the battery to discharge completely
- Recharge it more than 50%
- Hold the key "High Volume" and the button "Power" pressed for several seconds until this very basic menu appears on the screen
- Navigate with the volume keys to "Wipe Cache Partition"
- Confirm the procedure with the "Power" key
- Now select "Reboot System Now" to restart your Wiko Lenny 3
Factory reset your Wiko Lenny 3 to unlock it
If the first solution did not work, we will be even more radical, you will however lose all the data stored on your Wiko Lenny 3, however, if it is unusable, you will not be able to do anything. nothing happens to recover. It's up to you to see if you prefer to try to go see a repairer or carry out the procedure yourself if you have already saved all your data:
- Turn off your Wiko Lenny 3 or wait for it to turn off by itself when the battery is discharged
- Make sure it has more than 50% battery
- Access the recovery mode with the approach seen in the previous part
- Go to the option "Wipe Data / Factory Reset" with the volume keys, and confirm the procedure with the power button
- Finish the process by choosing the option "Reboot System Now"
In the event that you are looking for as many tutorials as possible to become a master of the Wiko Lenny 3, we invite you to explore the other tutorials in the category: Wiko Lenny 3.
