Even if the Android platform improves over time, it is unfortunately not uncommon to encounter bugs... Some are not absolutely problematic and will only have a very small impact on your daily life when others may, on the contrary, completely prevent you from using your Wiko Power U10. In this guide, we are going to tell you about a bug which, despite everything, only affects a few devices, but which is very disturbing. This is a startup bug, when you turn your smartphone back on, it remains stuck on the logo.
So in this guide, we will teach you how to fix Wiko Power U10 stuck on logo on startup? To do this, we will first try to interpret with you the nature of this bug, after that, to show you all the solutions at your disposal to unlock your Wiko Power U10 stuck on the Android logo.
Why does my Wiko Power U10 get stuck on the Android logo when switching on?
We start this guide by discovering the reason why your Wiko Power U10 remains stuck on the Android logo when switching on? This bug is really annoying because it prevents you from performing the slightest action on your smartphone and moreover you will not even be able to complete the start-up process, your Wiko Power U10 will therefore be completely unusable.
The causes of this bug can be numerous, although often it is after an update that a Wiko Power U10 hangs on the logo when switching on. It is usually a problem during the installation of the data that will generate this bug. Sometimes, it is after a fall, from an immersion in water that the bug can happen. In these cases, it is unfortunately not possible to do much outside to bring your Wiko Power U10 to a repairer because it is certainly components that are damaged that are responsible for the problem. The battery is sometimes the component that causes concern, do not hesitate to check the battery status of your Wiko Power U10.
However, we have already seen cases for which the nature is more blurred, no recent update installed, no drop... In these cases, as for a problem following an update, our solutions will be able to help you, discover them below.
How do I fix my Wiko Power U10 stuck on the Android logo when turning on?
We now move on to the solutions part of our article, and we will show you three different techniques, from the easiest to implement to the most complex for fix your Wiko Power U10 stuck on the Android logo.
Force stop your Wiko Power U10
First of the procedures, the simplest. You have probably tried to restart your Wiko Power U10 by leaving the "Power" button pressed for a few moments. In the event that this action does not work you will have to use the forced restart. You may not be familiar with this manipulation, however it is very simple and aims to restart a smartphone even if it bugs. In the event that this solution does not work, you will be able to try another technique to force your Wiko Power U10 to shut down, the objective being to turn it off so that the bug is no longer present at the time of the next restart. :
- To force restart your Wiko Power U10, keep your finger pressed on the "Power" key for 10 seconds
- In the event that this does not work, wait for the battery of your Wiko Power U10 to discharge completely to try to restart it once turned off
Make a Wipe Cache of your Wiko Power U10
In the event that the first manipulation did not work, we will move on to advanced solutions. We will go through the recovery mode of your Wiko Power U10 to unlock it. This mode is really useful if you are ever the victim of a bug, if you ever want to reset your smartphone ... We will in this part make a Wipe Cache which will correspond to cleaning all the cache memory of your Wiko Power U10 and therefore repairing any bugs:
- Turn off your Wiko Power U10, or wait for the battery to completely drain
- Recharge it more than 50%
- Hold the key "High Volume" and the button "Power" pressed for several moments until you see this very basic menu appear on the screen
- Navigate with the volume keys to "Wipe Cache Partition"
- Validate the operation with the "Power" key
- Now select, "Reboot System Now" to restart your Wiko Power U10
Perform a Factory Reset of your Wiko Power U10 to unlock it
In the event that the first technique did not work, we will be even more radical, you will however lose all the data stored on your Wiko Power U10, however if it is unusable, you will not be able to do anything happen to recover anything. It's up to you to decide whether you prefer to try to go see a repairer or carry out the procedure yourself if you have already saved all your data:
- Turn off your Wiko Power U10 or wait for it to turn off on its own when the battery is empty
- Make sure it has more than 50% battery
- Access recovery mode with the procedure explained in the previous part
- Go to the option "Wipe Data / Factory Reset" with the volume keys, and confirm the operation with the power button
- Finish the procedure by choosing the option "Reboot System Now"
If you want as many tutorials as possible to become the absolute master of the Wiko Power U10, we invite you to consult the other tutorials in the category: Wiko Power U10.
