Even if the Android platform has improved over the years, it is unfortunately not uncommon to encounter bugs... Some are not particularly problematic and will only have a very slight impact on your daily life while others may, on the contrary, prevent you absolutely to use your Wiko Power U20. In this article, we are going to tell you about a bug which fortunately only affects a few devices, but which is nevertheless very disturbing. This is a startup bug, when you turn your phone back on, it gets stuck on the logo.

So in this article we will teach you how to fix Wiko Power U20 stuck on logo on startup? In this context, we will first of all try to understand with you the origin of this bug, and then, to show you all the procedures at your disposal to unlock your Wiko Power U20 stuck on the Android logo.

block-on-logo-start-wiko-power-u20

Why does my Wiko Power U20 get stuck on the Android logo when switching on?

We start this guide by seeing why your Wiko Power U20 remains stuck on the Android logo when switching on? This bug is particularly annoying because it prevents you from performing the slightest action on your phone and moreover you will not even be able to complete the start-up process, your Wiko Power U20 will therefore be completely unusable.

The origins of this bug can be numerous, although often it is following an update that a Wiko Power U20 hangs on the logo when switching on. It is most of the time a problem at the time of the installation of the data which causes this bug. Sometimes, it is following a fall, an immersion in water that the bug can happen. In these cases, it is unfortunately not possible to do much except to bring your Wiko Power U20 to a repairer since it is probably components that are damaged that are responsible for the problem. The battery is sometimes the component that causes concern, we invite you to check the battery status of your Wiko Power U20.

However, we have already observed cases for which the origin is less obvious to distinguish, no recent update installed, no drop ... In these cases, as for a problem following an update, our solutions can help you, discover the following.

How do I fix my Wiko Power U20 stuck on the Android logo when turning on?

We now move on to the solutions part of our article, and we will show you three different alternatives, from the easiest to achieve to the most complicated for fix your Wiko Power U20 stuck on the Android logo.

Force stop your Wiko Power U20

First of the methods, the easiest. You have certainly tried to restart your Wiko Power U20 by holding down the "Power" button on the latter for a few moments. In case this action does not work you will have to use the forced restart. You may not know this manipulation, however it is very simple and aims to restart a phone even if it bugs. If this solution does not work, you can try another solution to force your Wiko Power U20 to shut down, the goal being to turn it off so that the bug is no longer present on the next restart:

  • To force restart your Wiko Power U20, keep your finger pressed for 10 seconds on the "Power" key
  • If that doesn't work, wait for the battery of your Wiko Power U20 to drain to try to restart it once turned off

Make a Wipe Cache of your Wiko Power U20

If the first technique did not work, we will move on to advanced solutions. We will go through the recovery mode of your Wiko Power U20 to unlock it. This mode is particularly useful if you are the victim of a bug, if you want to reset your smartphone ... In this part, we are going to accomplish a Wipe Cache which corresponds to cleaning all the cache memory of your Wiko Power U20 and therefore repairing any bugs:

  • Turn off your Wiko Power U20, or wait for the battery to fully discharge
  • Recharge it more than 50%
  • Hold the key "High Volume" and the button "Power" pressed for several moments until you see this very basic menu appear on the screen
  • Navigate with the volume keys to "Wipe Cache Partition"
  • Confirm the operation with the "Power" key
  • Now select, "Reboot System Now" to restart your Wiko Power U20

Perform a Factory Reset of your Wiko Power U20 to unlock it

If the first solution did not work, we will be even more radical, you will still lose all the data saved on your Wiko Power U20, however if it is unusable, you will not be able to recover anything in any case . It's up to you to decide if you prefer to try to go see a repairer or do the procedure yourself if you have already saved all your data:

  • Turn off your Wiko Power U20 or wait for it to turn off on its own when the battery is empty
  • Check that it has more than 50% battery
  • Access recovery mode with the procedure seen in the previous part
  • Go to the option "Wipe Data / Factory Reset" with the volume keys, and validate the operation with the power button
  • Finish the procedure by choosing the option "Reboot System Now"

In the event that you are looking for as many tutorials as possible to become a master of the Wiko Power U20, we invite you to explore the other tutorials in the category: Wiko Power U20.