Although the Android platform improves the more time passes, it still happens to suffer bugs ... Some are not really problematic and will not impact you very little in your daily life when others will prevent you from doing so completely using your ZenFone Max Pro M2. In this guide, we are going to tell you about a bug that fortunately only affects a few devices, but which is very disturbing. This is a startup bug, when you turn your phone back on, it gets stuck on the logo.
So in this guide, we will teach you How to fix ZenFone Max Pro M2 stuck on logo on startup? To do this, we will first of all try to understand with you the nature of this bug, then, to reveal all the alternatives available to you for unlock your ZenFone Max Pro M2 stuck on Android logo.
Why does my ZenFone Max Pro M2 get stuck on the Android logo on startup?
We start this guide by discovering Why does your ZenFone Max Pro M2 get stuck on the Android logo on startup? This bug is really disabling because it prevents you from performing any operation on your phone and moreover you will not even be able to complete the startup process, your ZenFone Max Pro M2 will therefore be totally unusable.
The causes of this bug can be various, although often It is after an update that a ZenFone Max Pro M2 hangs on the logo on startup. It is usually a problem during the installation of the data that will trigger this bug. Sometimes, it is after a fall, an immersion in water that the bug can happen. In these cases, it is unfortunately not possible to do much outside to take your ZenFone Max Pro M2 to a repairer because it is probably components that are damaged that are the cause of the problem. The battery is sometimes the component that causes concern, do not hesitate to check the battery status of your ZenFone Max Pro M2.
Despite everything, we have already observed cases where nature is less obvious to distinguish, no recent update installed, no drop ... In these cases, as for a problem following an update, our solutions can help you, discover them below.
How to fix my ZenFone Max Pro M2 stuck on Android logo when turning on?
We now move on to the solutions part of our post, and we will reveal three different methods, from the simplest to achieve to the most complicated for repair your ZenFone Max Pro M2 stuck on Android logo.
Force stop your ZenFone Max Pro M2
The first of the solutions, the easier. You have certainly tried to restart your ZenFone Max Pro M2 by holding down the “Power” button on the latter for a few seconds. If this manipulation has had no effect, you will have to use the forced restart. You may not know this technique, however it is very simple and aims to restart a phone even if it bugs. If this solution does not work, you can try another technique to force shutdown of your ZenFone Max Pro M2, the goal being to turn it off so that the bug disappears during restart:
- To force restart your ZenFone Max Pro M2, keep your finger pressed on the "Power" key for 10 seconds
- In the event that this does not work, wait for the battery of your ZenFone Max Pro M2 to discharge completely to try to turn it on again once it has been turned off
Make a Wipe Cache of your ZenFone Max Pro M2
In the event that the first solution did not work, we will move on to advanced solutions. We will go through the recovery mode of your ZenFone Max Pro M2 to unlock it. This mode is really useful in the event that you experience a bug, in the event that you want to reset your smartphone ... We will in this part do a Wipe Cache which will correspond to cleaning all the cache memory of your ZenFone Max Pro M2 and therefore repairing any bugs:
- Turn off your ZenFone Max Pro M2, or wait for the battery to drain completely
- Recharge it more than 50%
- Hold the key "High Volume" and the button "Power" pressed for several seconds until you see this very basic menu appear on the screen
- Navigate with the volume keys to "Wipe Cache Partition"
- Confirm the operation with the "Power" key
- Now select "Reboot System Now" to restart your ZenFone Max Pro M2
Factory reset your ZenFone Max Pro M2 to unlock it
In the event that the first technique does not work, we will be even more radical, you will still lose all the data saved on your ZenFone Max Pro M2, however if it is unusable, you will not be able to in any case nothing to recover. It's up to you to see if you prefer to try to go see a repairer or do the technique yourself if you have already saved all your data:
- Turn off your ZenFone Max Pro M2 or wait for it to turn off by itself when the battery is empty
- Make sure it has more than 50% battery
- Access recovery mode with the technique seen in the previous part
- Go to the option "Wipe Data / Factory Reset" with the volume keys, and confirm the operation with the power button
- Finish the technique by choosing the option "Reboot System Now"
If you ever want a lot of tutorials to become the absolute master of the ZenFone Max Pro M2, we invite you to consult the other tutorials in the category: ZenFone Max Pro M2.
