You probably don't know it, nevertheless the Crosscall TREKKER-M1 like the vast majority of Android cell phones have the ability to perform a lot of feats. It is true that our cell phones are not computers, but if this continues, in a few years we will no longer need computers. The most common concern will reside in the sockets and accessories part, despite everything, there is a little known procedure called OTG which will allow you to use the micro USB socket of your Crosscall TREKKER-M1 to properly connect it. number of devices.
We are going to teach you in this article how to use an OTG cable on a Crosscall TREKKER-M1? To do this, first, we will teach you what and how this technology works, then, how to use it, and, in this context, first help you find one, then teach you how to connect an OTG cable to your Crosscall TREKKER-M1.
What is an OTG cable used for on a Crosscall TREKKER-M1?
We therefore start our guide by teaching you the interest of using an OTG cable on a Crosscall TREKKER-M1. We explained it briefly in the introduction, OTG comes in practice from the term On-The-GO, this nomenclature actually defines devices that are capable of Support connection with USB devices. You have surely realized that for several years the vast majority of peripherals have been using USB technology, this is a problem for a Crosscall TREKKER-M1 since it is equipped with a micro or nano USB socket. OTG technology will allow it to overcome this lack and thanks to an adapter to act a bit like a computer.
With this technology you will be able to connect a lot of different peripherals such as printers, mice, keyboards, USB keys, external hard drives, joysticks to play ...
To verify that the software version of your Crosscall TREKKER-M1 supports USB OTG, you will have to check the smartphone box for a USB logo with “On-The-Go” in green below, there is a good chance that your smartphone supports it.
How do you use an OTG cable on a Crosscall TREKKER-M1?
We now move on to the second part of this guide, we will briefly teach you everything you need for you use an OTG cable with your Crosscall TREKKER-M1. To do this, first we will help you find one and then teach you how it works.
Where can I find an OTG cable for a Crosscall TREKKER-M1?
Before using one, you will need to obtain an OTG cable for your Crosscall TREKKER-M1. You head to be delighted to know that it is a product that costs very little because of its simplicity of manufacture, it is in fact simply a micro or nano USB or USB C adapter to a conventional USB. You will either have it in form adapter or as a cable.
Anyway the price will generally be between 5 and 10 €. You can get one in some hypermarkets or specialty shops. Otherwise, in the event that you do not need to bother and that you are not in a hurry, we recommend that you buy it on the internet you will find dozens of models compatible with the plug of your Crosscall TREKKER- M1.
How to connect an OTG cable to a Crosscall TREKKER-M1?
Finally, we will now teach you very quickly how do you use an adapter or an OTG cable on a Crosscall TREKKER-M1? You will have assimilated the technology we are talking about here is very simple and it is software internal to your smartphone which will be able to recognize devices connected to it.
You will simply have to install the cable or the adapter to your Crosscall TREKKER-M1, once this is done, you will be able to connect your USB device without delay, which should immediately be recognized by your smartphone. Once it's done you should be able to take advantage of it. If this does not work, unplug the accessory and repeat the procedure.
If you want a lot of tutorials to become the king of Crosscall TREKKER-M1, we invite you to browse the other tutorials in the category: Crosscall TREKKER-M1.