You probably don't know it, but the Wiko VIEWs like the majority of Android phones are capable of a lot of feats. Even if our phones are not computers, but if this continues, in a few years we will no longer need computers. The most common problem will concern the sockets and accessories part, despite everything, there is a little known technique called OTG which will give you the possibility of using the micro USB socket of your Wiko VIEW to connect a lot of accessories.
We will precisely in this article, teach you how to use an OTG cable on a Wiko VIEW? To do this, to begin with, we will teach you what this technology is used for and how it works, then how to use it, and, for that, first help you get one, then teach you how to connect an OTG cable to your Wiko VIEW.
What is the point of an OTG cable on a Wiko VIEW?
So we start our guide by teaching you the interest of using an OTG cable on a Wiko VIEW. We told you briefly in the introduction, OTG actually comes from the term On-The-GO, this nomenclature actually defines devices that will be able to Support connection with USB devices. You have probably realized that for several years the majority of peripherals are connected via a USB socket, this is a problem for a Wiko VIEW since it has a micro or nano USB socket. OTG technology will give it the possibility of compensating for this lack and thanks to an adapter to act a bit like a computer.
Using this technology you will be able to connect many different peripherals such as printers, mice, keyboards, USB keys, external hard drives, gamepads ...
To check that the software version of your Wiko VIEW supports USB OTG, you will have to check the box of the phone for a USB logo with green below noted "On-The-Go", there is a good chance that your phone supports it.
How to use an OTG cable on a Wiko VIEW?
We now move on to the second part of this guide, we will briefly teach you everything you need for you use an OTG cable with your Wiko VIEW. To do this, first we will help you find one and then teach you how it works.
Where can I find an OTG cable for a Wiko VIEW?
Before using it you will have to obtain an OTG cable for your Wiko VIEW. You head to be delighted to know that it is a product that costs very little because of its simplicity of manufacture, it is in fact very simple from a micro or nano USB adapter or USB C to a USB classic. You will either have it in form adapter or as a cable.
Anyway the price will usually be between 5 and 10 €. You can find it in some hypermarkets or specialty shops. Otherwise, in the event that you do not want to bother and you are not in a hurry, we advise you to buy it on the internet you will find dozens of models compatible with the socket of your Wiko VIEW.
How to connect an OTG cable to a Wiko VIEW?
Finally, we will now teach you very quickly how do you use an adapter or an OTG cable on a Wiko VIEW? You will have assimilated the technology we are talking about here is very simple and it is software internal to your phone that will be able to recognize devices connected to it.
You will very simply have to install the cable or the adapter to your Wiko VIEW, once it's done, you can immediately plug in your USB device which should immediately be recognized by your phone. Once that's done you should be able to dispose of it. If this does not work, unplug the accessory and repeat the procedure.
If you want a lot of tutorials to become the king of Wiko VIEW, we invite you to watch the other tutorials in the category: Wiko VIEW.
