If your Android mobile phone has fallen into the water, it may be goes out et does not light up. Indeed, the contact with liquid certainly caused a short circuit on your device, causing it to refuse to turn back on. Do not try to relight your mobile pressing all the buttons will only make the situation worse. There will be a few manipulations to do before turning your device back on. In addition, you will increase the infiltration of water inside your smartphone, and therefore, promote the oxidation of the components. In your misfortune, you can be happy that it is only water, and not sugary drinks: the latter prove to be fatal for a phone. You will therefore find in this article the right actions to adopt in an attempt to bring your Android cell phone back to life. Good reading!
Disassemble and dry your smartphone that has fallen in the water
Please note, this advice only applies to removable phones. You must first make sure that your Android mobile phone is well off (force the extinction if this is not the case). It will then be necessary remove all connected devices as well as peripherals (SIM card, SD card, etc.). Also remove the battery from its housing. You can then start drying the parts one by one using a towel or absorbent paper. Warning, you don't have to dry your android cell phone anyhow! Likewise, you should not shake your mobile in all directions to prevent water from seeping further into your device.
It must also be known that disassembling your device may void its warranty. On the other hand, it can be useful to prevent water from stagnating inside your Android mobile phone and oxidizing the components. Use a cotton swab to absorb the water present on open areas such as the jack plug, the charger plug or the speakers.
If your phone has been dropped in water and won't turn on, soak up the moisture
We'll present you two methods different in order toabsorb and remove moisture present inside your phone Android laptop. You should know that even if your phone seems dry and no longer shows traces of water from an outside point of view, this is not necessarily the case inside. Indeed, a total immersion in a liquid will necessarily have caused stubborn water infiltration that must absolutely be removed if you want your cell phone to turn back on and operate normally again. Here are two effective methods that will allow you to absorb moisture out of your smartphone:
Sphagnum moss, the most absorbent vegetable moss in the world
You can go to any garden center to bring this ultra absorbent vegetal foam. This plant has the ability toabsorb 20 times its weight in water, so it is an option that should not be neglected. If you don't have a garden center nearby, you can find this plant on the Internet. However, since a phone that has fallen in the water must be dried as soon as possible, we strongly recommend that you do not wait until the delivery of the vegetable moss to start absorbing the moisture out of your cell phone. Android.
Lock your fallen phone in an airtight bag filled with raw rice
Once you have dried the parts using an ultra absorbent paper or a towel, it will then be necessary to absorb the remains of moisture present inside your Android mobile phone. Then take an airtight bag filled with raw rice. Lock it all up in a tupperware for a minimum of 24 hours in order to dehumidify the components as much as possible of your device. If you don't have rice, you can use absorbent sachets (found in shoe boxes, for example) or moisture-wicking sachets.
