As you will have probably noticed, the definition of the photo lenses of our mobile phones is constantly improving. Which, of course, is good news for us users. That said, better quality photos and videos also means much larger file sizes. And that's not just the case with media files. As we always use our Motorola Moto E6 more and more for all the small everyday actions such as file transfers, sending attachments by email… We tend to keep a lot of data on these.
And while brands have recognized that storage is a big deal on cellphones, there are quite a few that don't have enough internal memory. Fortunately, for a large majority of models it is possible to use additional storage thanks to a memory card. This is precisely what we will discover in this article by introducing you how to insert an SD card into a Motorola Moto E6?
To do this, first we will show you how to locate the location for the memory card of your device, then, secondly, the procedure to insert an SD card into a Motorola Moto E6.
Where is the SD card drawer positioned on Motorola Moto E6?
We therefore start our article by showing you how to locate the location of the SD card on your Motorola Moto E6. This research is actually going to be very easy. Be aware, however, that on some phones this is an option and that it is not 100% sure that your smartphone has the slot for an external memory card.
SD cards will provide you with additional storage that is not superfluous because you can increase your capacity by several 100 gigabytes in the event that you opt for a large card. To find the drawer, we advise you to sift the edge of your Motorola Moto E6. It is indeed on one of the sides of the smartphone that you are most likely to find it. It is located most of the time on the upper or lower flank. It is very easy to spot it, you will see a kind of notch with a location of approximately 2 centimeters and a small hole right next to it which allows you to open it. In this drawer you will most of the time also find the location for the SIM card of your Motorola Moto E6.
How to insert a memory card into a Motorola Moto E6?
We now move on to the practical part of this guide, you will discover in detail the procedure to put an SD card in your Motorola Moto E6.
The different solutions to open the SD card drawer of a Motorola Moto E6
First and very important thing to know, there is a tool to open the SD card drawer of your Motorola Moto E6. As we explained to you a little above this is probably the location of your SIM card. You may remember when you first set up your smartphone and did this.
We will now give you a list of the different tools to open this drawer via the small hole which serves as a lock:
- The original drawer opening tool: You will find it in the box of your Motorola Moto E6, it is most of the time very small with a part the size of a 5 cent coin which is used to press with your fingers and a long tip to insert into the hole
- A sewing needle : In the event that you cannot find the tool or have no more the box, a sewing needle is the best option to open it
- A trombone
- Safety pin
The procedure to add a memory card to a Motorola Moto E6
Finally, now that you know all the tools and that you have located the compartment, we will show you how to insert the micro SD card into your Motorola Moto E6. To do this, follow the few instructions below:
- Turn off your smartphone
- Insert the tip of the tool or your optional solution in the hole provided for this purpose
- Push the tool gently into the hole until the micro SD card tray of your Motorola Moto E6 unlocks and comes out a few millimeters
- Remove it with your fingers
- Position your SD card with care, making sure to pay attention to the direction in its slot
- Put the drawer back in its place, in the right direction and push it down gently to the end
If you want a lot of tutorials to become the king of the Motorola Moto E6, we invite you to browse the other tutorials in the category: Motorola Moto E6.
