Even if the Android platform changes over the years, it is unfortunately not uncommon to suffer from bugs ... Some are not extremely problematic and will only disturb you in your daily life very little when others will, on the contrary, prevent you at all. using your Huawei Enjoy 9S. Today we are specifically going to tell you about a bug which nevertheless affects only a few devices, however which is very disturbing. This is a startup bug, when you turn your mobile phone back on, it gets stuck on the logo.
So today we will show you How to fix Huawei Enjoy 9S stuck on logo on startup? To do this, we will first try to understand with you the cause of this bug, then, then, to show you all the solutions available to you for unlock your Huawei Enjoy 9S stuck on Android logo.
The reason why my Huawei Enjoy 9S gets stuck on the Android logo when switching on?
We start this guide by seeing the reason why your Huawei Enjoy 9S gets stuck on the Android logo on ignition? This bug is really disabling because it prevents you from performing any operation on your mobile phone and moreover you will not even be able to finalize the start-up process, your Huawei Enjoy 9S will therefore be completely unusable.
The causes of this bug can be various, although often It is following an update that a Huawei Enjoy 9S hangs on the logo on ignition. It is in the majority of cases a problem at the time of the installation of the data which generates this bug. Sometimes, it is after a fall, an immersion in water that the bug can happen. In these cases, it is unfortunately not possible to do much outside to take your Huawei Enjoy 9S to a repairman Since it is probably damaged components that are responsible for the problem. The battery is sometimes the component that causes concern, we invite you to check the battery status of your Huawei Enjoy 9S.
Nevertheless, we have already studied cases for which the cause is more vague, no recent update installed, no drop ... In these cases, as for a problem following an update, our solutions will help you, discover them below.
How to fix my Huawei Enjoy 9S stuck on the Android logo when turning on?
We now move on to the solutions part of our post, and we will show you three different methods, from the easiest to perform to the most complex for fix your Huawei Enjoy 9S stuck on Android logo.
Force shutdown of your Huawei Enjoy 9S
First of the alternatives, the simplest. You have probably tried to restart your Huawei Enjoy 9S by keeping the “Power” key pressed for a few seconds. If this manipulation does not work, you will have to use the forced restart. You may not know this solution, however it is very simple and aims to restart a mobile phone even if it bugs. If this solution does not work, you can try another technique to force shutdown of your Huawei Enjoy 9S, the objective being to turn it off so that the bug disappears when you restart:
- To force restart your Huawei Enjoy 9S, keep your finger pressed on the "Power" key for 10 seconds
- If that doesn't work, wait until the battery of your Huawei Enjoy 9S is empty to try to turn it on again once it is off
Perform a Wipe Cache of your Huawei Enjoy 9S
If the first manipulation did not work, we will move on to advanced solutions. We will go through the recovery mode of your Huawei Enjoy 9S to unlock it. This mode is really convenient in the event that you experience a bug, in the event that you want to reset your smartphone ... In this part, we are going to perform a Wipe Cache which will correspond to cleaning the entire cache memory of your Huawei Enjoy 9S and therefore repairing any bugs:
- Switch off your Huawei Enjoy 9S, or wait for the battery to discharge completely
- Recharge it more than 50%
- Hold the key "High Volume" and the button "Power" pressed for several seconds until you see this very basic menu appear on the screen
- Navigate with the volume keys to "Wipe Cache Partition"
- Confirm the operation with the "Power" key
- Now select "Reboot System Now" to restart your Huawei Enjoy 9S
Factory reset your Huawei Enjoy 9S to unlock it
If the first technique did not work, we will be even more radical, you will however lose all the data stored on your Huawei Enjoy 9S, despite everything if it is unusable, you will not be able to recover anything anyway. It's up to you to decide if you prefer to try to go see a repairman or to do the procedure yourself if you have already backed up all your data:
- Switch off your Huawei Enjoy 9S or wait for it to switch off by itself when the battery is empty
- Check that it has more than 50% battery
- Access recovery mode with the procedure explained in the previous part
- Go to the option "Wipe Data / Factory Reset" with the volume keys, and validate, the manipulation with the power button
- Finish the procedure by choosing the option "Reboot System Now"
If you are ever looking for as many tutorials as possible to become the king of the Huawei Enjoy 9S, we invite you to consult the other tutorials in the category: Huawei Enjoy 9S.
