Even if the Android platform improves over time, it still happens to encounter bugs ... Some are not extremely problematic and will not impact you very little in your daily life when others may on the contrary prevent you altogether to use your Huawei Mate 30. Today we are just going to tell you about a bug which despite everything only affects a few devices, however which is very disturbing. This is a startup bug, when you turn your mobile phone back on, it gets stuck on the logo.
So today we will show you How to fix Huawei Mate 30 stuck on logo on startup? For this, we will first of all try to understand with you the cause of this bug, after that, to present to you all the solutions that you can achieve for unlock your Huawei Mate 30 stuck on Android logo.
The reason why my Huawei Mate 30 gets stuck on the Android logo when switching on?
So we start this tutorial by discovering Why is your Huawei Mate 30 stuck on the Android logo when turning on? This bug is really annoying because it prevents you from performing any action on your mobile phone and moreover you will not even be able to finalize the start-up process, your Huawei Mate 30 will therefore be completely unusable.
The causes of this bug can be multiple, although often it is after an update that a Huawei Mate 30 hangs on the logo on ignition. It is most of the time a problem during the installation of the data that will generate this bug. Sometimes, it is after a fall, an immersion in water that the bug can happen. In these cases, it is unfortunately not possible to do much outside to take your Huawei Mate 30 to a repairer because it is probably components that have been affected that are responsible for the problem. The battery is in some cases the component that causes the problem, do not hesitate to check the battery status of your Huawei Mate 30.
Despite everything, we have already observed cases for which the cause is less obvious to distinguish, no recent update installed, no fall ... In these situations, as for a problem following an update, our solutions will help you, discover them below.
How to fix my Huawei Mate 30 stuck on Android logo when turning on?
We now move on to the solutions part of our post, and we will present three different alternatives, from the simplest to achieve to the most complicated for fix your Huawei Mate 30 stuck on Android logo.
Force shutdown of your Huawei Mate 30
The first of the alternatives, the easier. You have no doubt tried to restart your Huawei Mate 30 by holding down the “Power” key on it for a few seconds. If this action does not work you will have to use the forced restart. You may not know this manipulation, however it is very simple and aims to restart a mobile phone even if it bugs. If this solution does not work, you can try another solution to force shutdown your Huawei Mate 30, the goal being to turn it off so that the bug disappears when you restart:
- To force restart your Huawei Mate 30, keep your finger pressed on the "Power" key for 10 seconds
- If it doesn't work, wait for the battery of your Huawei Mate 30 to discharge completely to try to turn it back on once it has been turned off
Perform a Wipe Cache of your Huawei Mate 30
If the first solution did not work, we will move on to advanced solutions. We will go through the recovery mode of your Huawei Mate 30 to unlock it. This mode is really useful if you ever experience a bug, if you ever want to reset your mobile phone ... We will in this part perform a Wipe Cache which will correspond to cleaning the entire cache memory of your Huawei Mate 30 and therefore repairing any bugs:
- Turn off your Huawei Mate 30, or wait for the battery to drain completely
- Recharge it more than 50%
- Hold the key "High Volume" and the button "Power" pressed for several seconds until this very basic menu appears on the screen
- Navigate with the volume keys to "Wipe Cache Partition"
- Confirm the operation with the "Power" key
- Now select "Reboot System Now" to restart your Huawei Mate 30
Factory reset your Huawei Mate 30 to unlock it
If the first solution did not work, we will be even more radical, you will lose all the data stored on your Huawei Mate 30, however, if it is unusable, you will not be able to do anything. to recover. It's up to you to decide if you prefer to try to go see a repairer or do the technique yourself if you have already saved all your data:
- Turn off your Huawei Mate 30 or wait for it to turn off on its own when the battery is discharged
- Check that it has more than 50% battery
- Access recovery mode with the technique explained in the previous part
- Go to the option "Wipe Data / Factory Reset" with the volume keys, and validate, the manipulation with the power button
- Finish the technique by choosing the option "Reboot System Now"
If you are ever looking for as many tutorials as possible to become the king of the Huawei Mate 30, we invite you to watch the other tutorials in the category: Huawei Mate 30.
